{"id":10726,"date":"2024-02-04T04:35:10","date_gmt":"2024-02-04T03:35:10","guid":{"rendered":"https:\/\/www.sewingfaq.com\/?p=10726"},"modified":"2024-02-04T04:35:10","modified_gmt":"2024-02-04T03:35:10","slug":"how-to-put-bobbin-in-old-kenmore-sewing-machine","status":"publish","type":"post","link":"https:\/\/www.sewingfaq.com\/how-to-put-bobbin-in-old-kenmore-sewing-machine\/","title":{"rendered":"How To Put Bobbin In Old Kenmore Sewing Machine"},"content":{"rendered":"
\n

What is a Bobbin?<\/h2>\n

A bobbin is a spool-shaped object that the sewing machine uses to store thread. The thread on the bobbin provides tension against the thread from the needle, allowing two pieces of fabric to be stitched together. Bobbins come in different sizes, shapes, and materials depending on the type of sewing machine they are used in.<\/p>\n

What is a Kenmore Sewing Machine?<\/h2>\n

Kenmore sewing machines are popular models of mechanical sewing machines first produced in the early 1900s. These machines are typically built to last, and are found in many households throughout the country. Kenmore sewing machines are available with either a hand crank or electrical motor, and come in various sizes, styles, and colors.<\/p>\n

How To Put Bobbin In Old Kenmore Sewing Machine<\/h2>\n

Properly installing a bobbin in an old Kenmore sewing machine is a relatively simple task. First, locate the bobbin winder on the right side of the sewing machine head. This is where the bobbin will be wound with thread. If the cover is not already open, open it by pressing down on the latch.
\nThe bobbin should be aligned so that the thread comes off the winder in a clockwise direction. To insert the bobbin, hold it with the side that will be on the bottom of the machine facing up, and place it between the two small prongs on the bobbin winder. Then, press the small lever or switch that is located just below the bobbin winder. This will lock the bobbin in place.
\nNext, thread the bobbin by pulling the thread from the spool and around the upper tension discs before inserting it into the hole in the middle of the bobbin. Wind the thread onto the bobbin in a clockwise direction. Once the bobbin is full, press down the lever or switch again to unlock it.
\nFinally, drop the bobbin into the bobbin case and secure it by pressing down the tension lever on the side of the case. Ensure that the thread is properly secured in the tension lever and that the bobbin is spinning freely. The bobbin can then be inserted back into the sewing machine and ready to use.<\/p>\n

Tips For Properly Installing Bobbins<\/h2>\n

Installing bobbins into Kenmore sewing machines can be done more smoothly and effectively with the following tips:<\/p>\n