{"id":10814,"date":"2024-01-21T02:35:10","date_gmt":"2024-01-21T01:35:10","guid":{"rendered":"https:\/\/www.sewingfaq.com\/?p=10814"},"modified":"2024-01-21T02:35:10","modified_gmt":"2024-01-21T01:35:10","slug":"how-to-oil-a-bernina-sewing-machine","status":"publish","type":"post","link":"https:\/\/www.sewingfaq.com\/how-to-oil-a-bernina-sewing-machine\/","title":{"rendered":"How To Oil A Bernina Sewing Machine"},"content":{"rendered":"
\n

What You Need to Oil Your Bernina Sewing Machine<\/h2>\n

In order to oil your Bernina sewing machine and keep it running smoothly, you will need a few basic items. Firstly you will need some machine oil, either mineral or synthetic. You will also need a small cloth to clean any excess oil or dirt away and some cotton swabs or a toothpick to apply the oil and clean in smaller spaces. Finally, you will need some petroleum jelly or silicone grease to lubricate the shuttle hook.<\/p>\n

Where to Oil Your Bernina Sewing Machine<\/h2>\n

Now that you know what you need to oil your Bernina sewing machine, you will need to assess where exactly to oil the machine. Firstly, find the oil points on your machine and look carefully at your user manual to make sure they are the correct locations. Generally, the instructions should include diagrams and instructions on where to apply the oil. Secondly, you will need to make sure that you don’t accidentally oil places that you shouldn’t, such as light sockets, electrical parts, the motor or other buttons and switches. Thirdly, check that you have oiled the correct parts correctly; applying too much oil can cause clogging.<\/p>\n

How to Prepare For Oiling Your Bernina Sewing Machine<\/h2>\n

Before you begin to oil your Bernina sewing machine, make sure to clean it thoroughly. This can be done using a damp cloth, however be sure to ensure that the cloth is not dripping wet and without detergent. Secondly, remove the accessory box, foot control and bobbin holders, as well as the shuttle hook, and then hold the wheel to make sure it turns freely. Thirdly, make sure to clean away any dust or dirt that may have collected around any of the joints and parts before you begin to oil.<\/p>\n

How to Oil Your Bernina Sewing Machine<\/h2>\n

Start by first spotting the oil points on your Bernina sewing machine and then remove any excess dust or dirt from them with a cotton swab. Then, apply the oil by gently dabbing it onto the parts and gently turning the wheel simultaneously. The wheel should turn freely and there should not be any excess oil. Re-oil the parts in the same manner and—using a cotton swab—wipe away any excess oil. Finally, replace any parts you may have taken off, give the wheel one final turn and your machine should now be oiled and ready for use.<\/p>\n

Repairing a Bernina Sewing Machine<\/h2>\n