Threading a Janome sewing machine is a relatively straightforward process, but it is one that requires precision and care. With that in mind, let’s look at what you need to do to thread your Janome sewing machine correctly, beginning with the basics of gathering all the necessary tools.
First and foremost, you will require a good quality organic cotton thread in the colour of your choice. Cotton thread is the best option for lasting wear and it is also thread that does not unravel. Additionally, you will need the spool pin for the machine, scissors for cutting thread and a small container of machine oil.
Once these components have been gathered, you should begin by turning off the power switch and removing the spool pin cover. Put the cotton thread on the spool pin, feeding the end through both the eyelet and the tension disc according to the instructions provided with your machine. It is important to keep the thread taut to ensure the threading is successful.
Next you should cut the thread 5 to 6 inches above the spool pin and thread the end through the thread guide, followed by the take up lever (this holds the thread going to the needle). Then come the thread guides located in front of the needle, as well as on the needle plate which can be removed for easier access to the thread guide but must be put back into place afterwards.
Once the thread is through the necessary areas, it is time to place it in the needle. Begin by raising the needle to its highest position; this is generally indicated when the hand wheel is at the top. Next, remove the needle clamp screw, insert the needle and reattach the needle clamp screw.
Having done this, you will need to thread the needle from the front to the back. Do this by forcing the thread through the needle’s eye, rotate the hand wheel and pull the thread through the needle using your fingers. Threads can also be threaded from the back to the front but this method is rare.
Finally, you are ready to begin sewing! Make sure to check the thread from the spool pin to the needle as it should not be too tight or too loose. If it is not exactly right, re-thread the machine and start once again.
Threading a Janome Sewing Machine: Step-by-Step
Threading a Janome Sewing Machine can be quite daunting if done for the first time. It is easy to follow however, if you take the process step-by-step. Gathering all the necessary tools, preparing the thread and threading it correctly are the main steps involved. Here are the steps on how to thread a Janome Sewing Machine.
1. Prepare the necessary tools: Before threading the machine, it’s important to gather all the necessary tools, such as organic cotton thread in the colour of your choice, a good quality spool pin and scissors for cutting thread.
2. Thread the spool pin: Start by removing the spool pin cover and then thread the cotton thread on the spool pin. When the thread is through, cut the thread 5 to 6 inches above the spool pin, and feed the remaining thread into the thread guide.
3. Thread the take up lever: Thread the end of the thread through the take up lever (this holds the thread going to the needle). Continue this process by also threading along the thread guides located in front of the needle and on the needle plate.
4. Thread the needle: Raise the needle to its highest position and then remove the needle clamp screw. Insert the needle and reattach the needle clamp screw. From here, force the thread through the needle’s eye. Rotate the hand wheel and pull the thread through the needle using your fingers.
5. Check the threading and start sewing: Check the thread from the spool pin to the needle making sure it is not too tight or too loose. If it is not exactly right, re-thread the machine and start once again. Once you’re satisfied with the threading, you can start sewing!
Guidelines on Threading a Janome Sewing Machine
Threading a Janome sewing machine can be a little intimidating for those who have never done it before. It is a simple process that, with practice, quickly becomes a second-nature task. Here are some expert tips and guidelines on how to thread your Janome sewing machine as quickly and efficiently as possible.
1. Organic cotton thread is the best: Cotton thread is the best option for lasting wear and it is also thread that does not unravel. Additionally, be sure to use good quality cotton thread that won’t break or cause any issues while sewing.
2. Keep the thread taut: Threading the spool pin is the first step of the process and it is important to keep the thread taut in order to ensure that the threading process is successful.
3. Double-check the thread: Don’t skip this step! When the threading is complete, make sure to double-check the thread from the spool pin to the needle. This will save time and effort if it needs to be rethreaded.
4. Practice makes perfect: Threading a Janome sewing machine is a process that requires some practice and technique to nail. Make sure to take the time to get it right and you will be able to thread the machine quickly and easily.
Common Mistakes When Threading a Janome Sewing Machine
Threading a Janome sewing machine is a straightforward process but there are certain mistakes that can easily be made if one is not careful. Here are some of the most common mistakes made when threading a Janome sewing machine.
1. Not checking the thread: Skipping this step and not checking the thread can lead to problems when sewing. This can be avoided by making sure to take a common check of the thread from the spool pin to the needle.
2. Incorrect spool pin: Using a low-quality spool pin can affect the overall quality of the sewing process. Make sure to use the one provided with the machine and to replace it with a better quality one if necessary.
3. Incorrect needle: Using the wrong size needle can also wreak havoc on the sewing machine. Be sure to choose a needle that is compatible with the thread and the fabric being used.
4. Forgetting to reattach the needle clamp screw: Once the needle has been placed and the threading process is complete, don’t forget to reattach the needle clamp screw. This will ensure the needle is secure and the sewing process will go more smoothly.
How to Troubleshoot Threading Issues in a Janome Sewing Machine
Threading issues can easily arise when using a Janome sewing machine. If this is the case, don’t panic as there are some simple steps you can take to troubleshoot the issue without much effort.
1. Check the threading: This is always the first step to take when troubleshooting threading issues. Make sure to take a look at the thread from the spool pin to the needle and check for any areas where the thread may be too tight or too loose.
2. Check the needle: Make sure to inspect the needle. If it’s loose or of poor quality it could be causing issues with the threading. Replace the needle with one of a better quality if needed.
3. Adjust the tension: If the thread is not correctly tensioned it can lead to snagging and knotting. Check and adjust the tension as needed to ensure the thread is evenly tensioned and free from knots or snags.
4. Clean the bobbin case: Finally, take a look at the bobbin case. Make sure it’s free from lint or dust and that it is adjusted correctly. If not clean the bobbin case and adjust as needed.
