Sewing machines are essential pieces of equipment in the sewing world. Experienced tailors and seamstresses use them extensively to create beautiful garments, accessories, and home décor. One brand of sewing machines that many professionals and hobbyists adore is the Singer Sewing Machine. Without the right knowledge, however, properly threading a Singer can be a struggle. So, let’s explore the world of Singer Sewing Machines and learn how to thread them effectively.
Before threading a Singer Sewing Machine, it’s important to prepare the thread in the correct way. Start by gathering the thread and sliding it through the hole in the spool pin at the top of the machine. The thread should come off the spool to your left, in the direction of the bobbin winder. Make sure the thread is pulled tightly before moving on, as an un-tensioned thread can cause jams and other inconveniences.
The next step is to thread your Singer’s needle bar. This is done by passing the thread from the left to the right lower side. Carefully guide the thread through the thread guide at the top of the needle bar and the take-up lever. It is important to make sure the thread is passing through all the thread guides, as an improperly threaded needle bar can cause jams and breakdowns.
The next step is to wind the bobbin. This can be done by placing the bobbin onto the machine’s spindle, placing the tension disk over it and wrapping the thread around the bobbin winder. Press the Bobbin winder stopper, then switch on the motor by moving the presser foot lever. When the bobbin is full, push the bobbin winder in and the spindle will disconnect. Remove the bobbin and the tension disk.
By now, the needle thread and bobbin should be threaded. The next step is to thread the reel pin and the reel feed dog. Begin by placing the thread around the reel pin at the back of the machine, then guide the thread through the thread-guide to the right side of the machine. Once the thread is through, move it around the pattern selector dial, then further down to the reel feed lever. Ensure that the thread does not get stuck as it passes through the needle thread guides and the reel feed lever.
The last step is to thread the bobbin case. This needs to be done carefully as an improperly threaded case can cause tension issues. Start by inserting the bobbin in the bobbin case, and make sure the bobbin is positioned in the same direction as the machine’s rotation. Then, thread the bobbin case by passing the thread through the slot and around the bobbin tension regulator. Pull the thread up and pass it through the next slot to the right.
Now, the thread should be through the bobbin case. Pull both the needle thread and bobbin thread through the needle plate, then pass the needle thread back around the take-up lever. Hold onto the end of the needle thread and pull the bobbin thread to fix the loops. Then, trim the loose threads and make sure the threads are tight.
Finally, check the tension of the threads by pulling on the loose ends. Ensure that both the needle and bobbin threads are even before starting a project.
Cleaning the Parts
Before and after each use, it’s important to clean the machine’s parts. For instance, first use a damp cloth to wipe away dirt, dust and lint from the machine’s exterior. Make sure to remove the residual oil from the spool pins, reels, and other movable parts. To clean other parts, examine the manual and the machine’s instructions before proceeding.
Lubricating the Sewing Machine
If you use your sewing machine often, it is essential to lubricate it after cleaning. Applying the correct oil in the right places can help reduce friction and wear on the machine’s components, thus enabling it to sew better and longer. Apply a few drops of machine oil on the visible moving parts and on the bobbin pin. Don’t forget to wipe away any excess oil afterward.
Storing the Machine Safely
When it’s not in use, it’s essential to store your sewing machine safely. The best place to store it is in a case that is dust-free and away from direct sunlight. Make sure to keep your sewing machine in a place where children and pets can’t access it.
Scheduling Maintenance for the Sewing Machine
Organizing professional maintenance for your Singer Sewing Machine is also important. Professional services provided by authorized shops and centers can help identify and repair any underlying issues with the machine. They can also detect and replace any worn-out parts before the machine breaks down.
By following these simple steps and guidelines, Singer Sewing Machines can easily be threaded, enjoyed, and maintained. Threading a Singer is essential to experience great outputs and be able to undertake challenging projects. By having the correct knowledge, Singer Sewing Machines can truly be appreciated and enjoyed.
