Step 1: Gather all the Necessary Supplies
Before attempting to do Pico in a Brother sewing machine, make sure to have a few essential supplies. These supplies include the Brother machine, a chisel or awl, needle-nose pliers, a ruler, a screwdriver, and a pair of scissors. Make sure to place all these supplies in an easily accessible place in order to prevent any potential disruptions when doing the project.
Step 2: Test the Machine
Once all the necessary supplies have been gathered, it is important to turn the Brother sewing machine on and test it. This testing will help to identify any potential issues that may need to be dealt with before attempting the Pico project. To test the Brother machine, make sure to turn it on and check if it is working without any unusual sounds or vibrations. In addition, make sure to check the settings and make sure that it is set to the correct tension settings.
Step 3: Thread the Machine
After the machine has been tested and is running smoothly, it is then time to thread the machine. This involves passing the thread through the spool, thread guide, needle eye, and bobbin. Once threading is complete, make sure to check for any loose threads by looking for tension and evenness. In addition, make sure to cut any excess thread from the needle.
Step 4: Setting the Pico
Once the Brother machine is threaded, it is then time to set the Pico. This require the use of the chisel or awl and the ruler. First, use the ruler to measure the width of the hems that need to be sewn. This will provide a guide in which to measure the Pico. Use the chisel or awl to mark the fabric in four spaces: two inches, four inches, six inches, and eight inches, respectively. It is important to be precise when marking these measurements, as too much or too little width could cause the project to be uneven.
Step 5: Prep the Needle
Once the Pico is set, it is time to prepare the needle for stitching. First, use the needle-nose pliers to reduce the space between the needle clamp and the needle plate. This will prevents the needle from getting caught on any fabric, as it will be pushed more firmly onto the plate. Then, slip the needle into the fabric, making sure it is level with the markings previously made.
Step 6: Start Stitching
Once the needle has been properly prepared, it is then time to start the stitching process. This requires the use of a screwdriver. First, turn the screwdriver to the left, in order to lower the presser foot. This will help keep the fabric in place while stitching. Then, turn the wheel towards the front of the machine in order to start the stitching process. Once the stitching is complete, use the scissors to cut the remaining thread.
Step 7: Tying Off the Thread
The last step in doing Pico in a Brother sewing machine deals with tying off the thread. This process is simple, but it is important in order to properly secure the stitches and ensure that the hems will not come undone. To do this, simply pull the top and bottom thread towards the back of the fabric, and tie them together in a knot. This will help to ensure that the hems are secured in place.
Step 8: Inspecting the Hems
Once the thread is tied off, it is then time to inspect the hems and make sure that they are even. To do this, simply look at the width of the hems and make sure that it matches the measurements taken with the ruler. Also, make sure to check for any loose threads or unevenness that could potentially cause the hems to fray or come undone.
Step 9: Finishing Up
After inspecting the hems, turn the Brother sewing machine off and recheck the tension settings. Finally, gather all the supplies and store them in a safe place, in order to ensure that they are ready for future projects.
Advantages of Pico
One of the main advantages of doing Pico in a Brother sewing machine is that it allows for precise measurements and secure hems. It can also be used to add decorative details to projects, as it allows for even stitching and neat hems. In addition, the use of the chisel or awl for making measurements helps to ensure that hems are even and the desired width is achieved.
Disadvantages of Pico
Although doing Pico in a Brother sewing machine allows for precise measurements and secure hems, it can also pose some disadvantages. For instance, it can be time-consuming and complex to do, especially if a person is not experienced in using a sewing machine. In addition, it can be difficult to create even hems if the measurements are not precise or if the tension is not set right.
Common Pitfalls of Pico
When doing Pico in a Brother sewing machine, there are several potential pitfalls that should be avoided. For instance, it is important to make sure that the measurements taken with the ruler are precise, as this can have an effect on the evenness of the hems. In addition, make sure to set the thread tension correctly; if it is too high or too low then the stitching could become uneven. Finally, make sure to regularly inspect the machine for any loose threads or other issues that may cause disruption during the process of doing Pico.
Alternatives to Pico
Although doing Pico in a Brother sewing machine is a relatively common technique, there are also other alternatives that can be used. For instance, doing an overlock stitch (also known as a “serger stitch”) is one way to secure the hems without having to use a lot of thread. In addition, doing a zigzag stitch is another commonly used technique that allows for secure hems without having to use precise measurements.
Tips for Doing Pico
When attempting to do Pico in a Brother sewing machine, there are several tips and tricks that could be helpful. For instance, it is important to make sure that the thread is properly tensioned; this will help with achieving the desired width of the hems. Also, it is important to take the time to inspect the needle and the machine regularly in order to avoid any potential disruption. Finally, practice is important for achieving even hems; therefore, it is important to practice the technique on scrap fabric in order to build up familiarity.
