Supplies Needed to Hem Without Sewing
There are few items needed to hem pants without sewing a machine. Firstly, a pair of pants that are a bit too long are necessary. A pair of scissors, an iron, a measuring tape, a fabric marker, fabric glue and some fabric scraps can also be helpful for the process. Also, a good pair of tweezers can help to hold the fabric and make it easier to apply the fabric glue.
Measuring and Marking
Using the measuring tape, measure the desired length of the pant leg. It is best to start from the inner seam of the pant leg and end at the bottom of the hemline. Once measured, mark the length with a fabric marker. This way the hem line is clearly marked on the pant leg.
Cutting the Fabric
Cut the bottom of the pant leg along the hem line. The fabric marker helps to make sure that the fabric is cut evenly. If a leather or denim fabric is being used, it is a good idea to cut 3/4 inch more than the desired length to make sure that there is excess fabric to work with. This step is important so that the final fit of the pant leg is comfortable and looks good.
Ironing the Hem
Once the pants have been cut, the next step is to iron the hem. Heat up the iron and adjust the setting according to the fabric type. Carefully iron the edge of the fabric along the hem line. When the iron is heated up, the edge of the fabric may stick out, so be sure to iron it flat.
Tacking the Hem in Place
Tacking pins can be used to hold the fabric while ironing. Place the pins in the corners and in the middle of the fabric to keep it flat while ironing. This will ensure that the hem is tacked down securely.
Adding Fabric Glue to the Hem
The fabric glue can be used to further secure the hem in place. Start by placing a line of glue along the inside of the hem. Use the tweezers to carefully spread out the glue and make sure that it is evenly distributed along the length of the hem. Then, place a second line of glue over the first line.
Finishing the Hem
Next, take the fabric scraps and fold them in half. Place them over the glued hem and use the iron to press them in place. This will help to seal the hem and keep it in place. Finally, use the scissors to trim any excess fabric from the hem.
Considerations and Tips
When hemming pants without a sewing machine, it is important to consider the fabric type and to use the right supplies. It is also important to mark the fabric with a fabric marker and to cut the fabric in a straight line. Finally, make sure to use the right amount of fabric glue and to press the fabric firmly in place with the iron.
Shortening Pant Legs With a Hem
Shortening a pant leg with a hem is a relatively quick and easy process. All that is required is a pair of scissors, a fabric marker, some pins or clips, fabric glue, fabric scraps and an iron. Start by measuring the desired length of the pant leg and then marking it with a fabric marker. Cut the pant leg to the desired length and then iron the hem. Tack the fabric with pins or clips, spread some fabric glue along the inside of the hem and then press the fabric scraps in place with the iron.
Recreating a Pant Hem
For a worn out or frayed pant hem, recreating the hem is the best option. Firstly, take the old hem off completely by cutting away the excess fabric. Cut the pant leg to the desired length and then iron the edge to flatten it out. Then, glue the edge of the fabric and press some fabric scraps in place with the iron. Finally, use the scissors to trim any excess fabric from the hem.
Repairing a Torn Pant Hem
A torn pant hem can be easily repaired with some fabric glue and fabric scraps. Firstly, cut away the loose threads and torn fabric fibres. Apply fabric glue to the torn area and press some fabric scraps over it. Make sure that the fabric scraps are pressed firmly in place with the iron. Finally, use the scissors to trim any excess fabric from the hem.
Invisible Hemming
Invisible hemming can be used to achieve a professional looking finish to a pant leg. Start by cutting the pant leg to the desired length and then mark the hem with a fabric marker. Heat up the iron and press the hem in place. Use the tweezers to hold the fabric taut and then apply some fabric glue to the inside of the hem. Press some fabric scraps over the glue and press with the iron. Finally, use the scissors to trim any excess fabric from the hem.
