How to Insert Bobbin into Singer Sewing Machine
Using a Singer sewing machine can appear daunting for a beginner, but with a few simple steps and the right instruction, you can easily learn how to thread the machine and operate it successfully. To sew, the bobbin must first be properly inserted into the machine, and that can also be a daunting task for a first-time user. In this article, we’ll walk you through the process of inserting the bobbin into a Singer sewing machine.
Identifying the Bobbin
Before you get started, you’ll need to make sure you have the bobbin correctly identified. Bobbins vary in size and shape, so it’s important that you have the right size and style for your Singer machine. This information can typically be found in the manual that came with your Singer machine. Once you’ve identified the correct bobbin, you can begin the process of loading it into the machine.
Opening the Bobbin Compartment
The next step is to locate and open the bobbin compartment of the Singer machine. This is usually located on the top right-hand side of the machine. Place your hand over the top of the machine and feel for a round disk. This disk pulls out, and once you’ve removed it, you’ll see the bobbin compartment. Once the compartment is exposed, you will see a metal bobbin case.
Loading the Bobbin into the Bobbin Case
Most Singer bobbin cases are loaded from the front in the same way. Carefully release the latch on the bobbin case, and you will see a small hole. Push the bobbin into the hole until it is completely engaged and make sure the thread feeds from left to right as you look at it.
Inserting the Bobbin ‘Upside Down’
Now you’ll need to flip the bobbin “upside down” and make sure its thread is facing towards you. This is important. If the thread is facing any other direction, it can cause the machine to jam up. If the bobbin has been loaded correctly, you should hear a gentle clicking sound as it rotates on the case.
Reengaging the Bobbin Compartment Latch
Once the bobbin is correctly seated, simply reengage the latch and give it a few gentle taps to make sure it is securely latched. Then, wind the thread around the bobbin a few times, making sure to keep the thread snug.
Lifting the Bobbin Compartment Cover
The final step is to open the bobbin compartment cover so the thread can move freely as the bobbin is being used. Lift the cover carefully and press the “start” button on the Singer machine. This will cause the bobbin to spin and should activate the machine.
Checking Thread Tension
Once the bobbin spinning is complete, check the thread tension to make sure it looks good. If it doesn’t, you can adjust it by using the tension screw on the Singer machine. You should repeat this process until the tension is just right. Once you’ve completed this process, your Singer machine is now ready to use!
Conclusion
Inserting a bobbin into your Singer sewing machine can seem daunting, but by following these simple steps and understanding the process, you can easily thread a Singer bobbin and get the machine up and running.
