Cleaning the Machine
Regularly cleaning the sewing machine is the fundamental starting point for maintaining it. Make sure to regularly dust the external units of the machine and use a damp cloth when cleaning the exterior. There are also specific parts of the internal mechanisms which need to be kept clean. Take off the bobbin case and the throat plate to clean any dust and lint before oiling the machine. This will prevent any dust or dirt blocking the oil from reaching its intended destination. Also be sure to use a smaller brush to remove any dust from hard to reach areas. A vacuum cleaner can also be used to help with this.
It is important to only use approved cleaning items when cleaning your sewing machine. Make sure you check the user manual to find out what cleaning solutions and solutions you should use to your Singer Heavy Duty Sewing Machine. Do not use any liquid solutions that can potential harm the internal mechanisms, as this can result in the machine malfunctioning.
Types of Oil
When it comes to oiling your Singer Heavy Duty Sewing Machine, always use the specific oil designed for use with Singer machines. Applying any other kind of oil can break down the internal components and consequences could be very expensive. Singer heavy duty machines are usually supplied with the specific oil required to lubricate the inner mechanisms of the machine.
The oil used for Singer Heavy Duty Sewing Machines is a light-weight, odourless, tasteless oil which provides a thin balm for parts to smoothly glide against one another. Sewing machine oil needs to be formulated so that it does not break down or congeal and leave a sticky, gummy residue. Different manufacturers produce various versions of oil, each suitable for different machines.
Tools Required for Oiling
Having the right tools for the job is essential for regular maintenance punching. Be sure to check what specific tools are needed for oiling your Singer Heavy Duty Sewing Machine, as these can vary slightly depending on the model. Generally, a small oil can or eyedropper filled with Singer Heavy Duty Oil is needed, as well as some dental picks. These picks are useful to apply the oil to hard to reach parts.
Process of Oiling the Machine
Firstly, turn off the power switch on the machine. Refer to the manual to obtain information about the exact area which contains the oiling points. Most modern Singer Heavy Duty Sewing Machines have all the oiling points located on the front or top side of the machine. All moving parts of the machine are to be lubricated. Use the dental pick to apply a few drops of oil to each oiling point. Remember to use only one drop of oil at each point. If you apply too much oil, it may build up and form a thick paste in the crevices of the machine.
Once the oil is being applied, turn the hand wheel slowly several times. This will help to move the oil to other points so that the entire machine is lubricated. If you feel the needle hitting resistance turning the wheel, add a drop or two of oil to increase lubrication.
Once the hand wheel has been turned, the machine is ready to operate. Once the machine is turned back on, it is important to check for any signs of malfunctioned parts or any strange spluttering noises. If any unexpected signs appear, do not hesitate to reach out to a local service technician for additional advice.
Using Sewing Machine Oil
Once the sewing machine is oiled correctly, the machine should run smoother than before with no problems. Although oil is used to lubricate parts, care should be taken not to over oil the machine as it may cause more harm than good. Always refer to the owner’s manual for advice on how and when to oil the sewing machine. Depending on the machine, oiling should be done every month or so. The more you use the machine, the more often you’ll need to oil it.
It is generally recommended that the oil is applied on the resistant points and to the other moving parts of of the machine. Be sure to get into all the inner bearings and joints of the mechanism and never put oil on the outside surfaces. This is especially true for the bobbin winder parts and on the electrical contacts.
Keeping it in Good Condition
To ensure the longevity of your Singer Heavy Duty Sewing Machine, it is important to clean and oil the machine regularly. After each use, be sure to unplug the machine and clean any dust or lint from the inner mechanisms. It’s also a good idea to check for any loose parts, as these can cause further damage to the machine if not taken care of. Finally, use Singer approved oil to lubricate the machine. This will help to make sure that the machine is running smoothly and that no damage is done to any internal parts.
Types of Maintenance
Preventative maintenance is key when it comes to keeping a Singer Heavy Duty Sewing Machine in good condition. This includes regularly cleaning and oiling the machine and performing regular inspections. Every time you oil the machine, be sure to check for signs of wear and tear, such as loose screws or any other problems. If any of these issues are found, contact your local service technician immediately.
It is also important to regularly clean the underbelly of the machine as dust and lint can build up in there, which can affect the performance of the machine. Finally, always refer to the Singer maintenance instructions when cleaning and oiling the machine and replace any worn parts as soon as they occur.
Safety Tips
When cleaning and oiling your Singer Heavy Duty Sewing Machine, make sure to take extra precautionary measures. Be sure to unplug the machine from the wall socket, avoid getting any liquid parts wet and never put your fingers too close to any moving parts. Make sure to always handle the machine with care and never drop it.
Another safety tip is to never reach inside the machine or attempt to repair it yourself. This could be extremely dangerous, so the rule is to always contact an authorised service technician for any repairs or maintenance. Also, never attempt to use the machine if any of its parts are broken, or if there is any liquid inside the machine.
Conclusion
Generally, routine oiling of a Singer Heavy Duty Sewing Machine is necessary to maintain it in good condition and get the best performance out of it. Be sure to use the correct tools and Singer approved oil and to follow the maintenance and safety instructions provided thoroughly. Cleaning and oiling your sewing machine regularly is essential for making sure your machine is working reliably and safely.
