Thread Bobbin
Singer sewing machines are very common and many of them come with a foot pedal installed. Before you learn how to put the foot on your machine, you need to familiarize yourself with the bobbin thread. Bobbin threads are the type of thread used in sewing machines and to put a foot on the machine they should be inserted correctly. There are two types of bobbin thread, top bobbin and bottom bobbin. The top bobbin thread is visible on the fabric. The bottom bobbin thread is not visible but is essential for strong, invisible seams. Purchasing quality bobbins is essential and they should be carefully loaded into the machine.
Prepare Machine
After the bobbin threads are loaded into the machine, it is time to prepare the machine for the installation of the foot. Depending on the model of Singer sewing machine you have, the process may be slightly different. To begin, make sure to turn off the power. Remove any needles, presser feet, or other items you have attached prior to attempting to install the new foot. Once all items have been removed, it’s time to install the foot.
Installing Foot
To install the foot onto the machine, start by placing the foot onto the presser foot lifter. This is the device which controls the amount of pressure the foot applies to the fabric. Swivel the foot so that it fits securely against the machine. After the foot is in place, secure it with the screws provided. Depending on the model of your machine, there may be two, three, or four screws.
After the foot is secured, it is time to attach the adjustment lever. This lever is used to lower and raise the presser foot. Depending on the model of Singer sewing machine you have, the adjustment lever may be mounted at the back or front of the machine. Once the adjustment lever is in place, connect it to the presser foot lifter. The adjustment lever also needs to be secured with screws.
Test Foot
After the foot is installed, it is a good idea to test it before using the machine to sew anything. To test the foot, turn the machine on and press the pedal lightly. If the presser foot lifter moves properly and the foot lowers or raises without any problems, then the foot is correctly installed. If the presser foot lifter does not move or the foot is loose, then you need to readjust or tighten the screws.
Conclusion
Putting a foot on a Singer sewing machine is a relatively simple process. However, it requires precision and patience to make sure that it is done correctly. Be sure to prepare the machine for the foot installation and test the foot afterward. This will ensure that your Singer sewing machine is always running in top condition.
Additional Tips
In addition to following the steps outlined above to put the foot on a Singer sewing machine, there are also some other tips you should keep in mind. Make sure to keep all parts of the foot clean and free of rust. In addition, when you are working with delicate fabric, always use the proper sewing feet and needles to avoid damage. Finally, if you are a beginner, it is always a good idea to consult your Singer sewing machine manual.
Lubrication and Maintenance
If your Singer sewing machine has a foot, then it is important to keep it lubricated and well maintained. This will increase its longevity and help ensure reliable performance. Most Singer sewing machines come with a can of machine oil as well as instructions on proper application. You can also consult your Singer sewing machine manual or contact your local Singer dealer for specific information. For maximum performance, it is recommended to lubricate the machine and its foot once a month.
Alternate Presser Feet and Uses
There are many presser feet available for Singer sewing machines and most come with more than one foot. Most of these feet have specific uses. For example, the walking foot is used for heavy fabrics such as denim as well as quilting, while the blind hem foot is primarily for hemming. Different feet also require different settings on the sewing machine. In addition, there are many specialized feet available for specific tasks such as decorative stitching, appliqué, and stitches with thick threads.
FAQs
Frequently Asked Questions, or FAQs, are important to consider when putting a foot on a Singer sewing machine. What is the difference between a regular and a reinforced presser foot? A regular presser foot is best used for lightweight fabrics, while a reinforced presser foot is used for heavier fabrics and may have additional features such as built-in guides and levers. How do I clean the presser foot? It is important to clean the presser foot periodically with a damp cloth and mild detergent. Rubbing alcohol can also be used to disinfect and remove stubborn dirt.
