Part One: Getting Started – How to Put Presser Foot on Brother Sewing Machine
Sewing projects can be a great way to express your creativity and put your skills to the test. Such projects can range from altering clothes to designing garments from scratch. One of the most important steps in any sewing project is putting the pressure foot on the sewing machine, which is necessary in order to get started. Putting the pressure foot on a Brother sewing machine is fairly easy, but there are a few steps you’ll need to take first.
Before you begin, you’ll need to ensure that the sewing machine is unplugged, as this will reduce the risk of electric shock. If the power cord isn’t disconnected, it’s a good idea to switch off the power switch as a precaution. Once you have done this, make sure the presser foot lever is in its up position. This ensures that the pressure foot can be freely moved around without resistance.
The next step is to open the compartment that houses the presser foot by pushing the relevant button. This will allow access to the presser foot, and you’ll need to be careful not to touch any of the other components in the compartment. To put the pressure foot in place, use your thumb to press down on the back of the presser foot and lever, then insert the foot onto the shank. You should do this in an upward motion, as this will help secure the pressure foot in its place.
Part Two: Locking the Presser Foot – How to Put Presser Foot on Brother Sewing Machine
Once the presser foot has been inserted, it’s important to ensure that it’s secure. To do this, check that the presser foot lever is in the down position, which will lock the pressure foot in its place. This allows the pressure foot to press down against the material while the machine is sewing. It’s important to ensure that the pressure foot is fully inserted and locked before you start using the machine.
To check that it’s firmly secured, try lightly pulling the presser foot and check if it holds. If it falls out of place, it means that it’s not locked and should be reinserted and locked again. If it holds steady, the presser foot is secure and you can get started on your project.
Part Three: Releasing the Presser Foot – How to Put Presser Foot on Brother Sewing Machine
During your sewing project, you may need to remove the presser foot for one reason or another. To do this, you’ll need to slightly lift the presser foot lever, which will unlock the pressure foot. Once unlocked, use your thumb to press down on the back of the foot and lever, and then carefully slide the foot off the shank. Make sure that the foot is fully removed and the pressure foot lever is still lifted.
Once the presser foot is removed, you won’t be able to sew until you replace the presser foot. To do this, place the presser foot back onto the shank, tapping it with your finger if necessary. Again, make sure to use an upward motion when placing the pressure foot in its place, and check
