Locating Parts
When putting together a Brother sewing machine, the user must be aware of all the necessary components that are required to correctly assemble the machine. Typically, the components are divided between the base and the arms and should include several screws, a spool pin holder, a slide plate, a foot pedal, Bobbins and thread, a needle and presser foot. It should also come with an instruction booklet and all the necessary cables and connections.
The instruction booklet provided by the Brother Sewing machine is an essential resource for anyone looking to piece together the machine appropriately. It will usually provide helpful diagrams detailing the exact placement of all the components, as well as step-by-step procedures for common tasks such as threading and basic troubleshooting. Experienced sewers may be able to assemble the machine with no issue, but even then it’s important to ensure that all parts are fitted correctly so that sewing can be done efficiently.
Attaching the base
Once all the necessary components have been located, the user can begin by attaching the base of the machine. This is usually done by placing the machine on a flat surface and inserting the required screws into the bottom of the base. It’s important to make sure that these screws are secured and tightened in order to avoid any accidents or damage.
Next, the spool pin holder must be attached, this is a small metal rod that sits on the side of the base and will hold the Bobbins and thread in place. Once this is completed, the slide plate can be inserted, it should sit directly above the needle and ensure that the sewing machine is able to move up and down smoothly.
Connecting arms and feet
The user should now begin attaching the arms and feet of the Brother sewing machine. This involves attaching both the foot pedal and the rear feet, feet to the base of the machine. This is done by using the screws provided in the instruction booklet and ensuring that the screws are secure and firmly attached. Once the feet and arms have been attached it is time to connect the power source.
The power source is usually provided in the form of a black cable and should be connected to the rear of the machine. In some cases, the connection will already be provided but, depending on the model, the user may need to plug the two parts together themselves. Once the power source has been connected the machine should start to work and is now ready to begin sewing.
Threading a Brother Sewing Machine
Threading a Brother sewing machine is relatively straightforward, although can be slightly more involved than traditional threading methods. Typically the threading process starts by inserting the spool of thread into the spool pin holder and clip the bottom of the thread. Once this is done the user should take the thread and place it directly onto the needle threader, this part of the machine will assist in getting the thread onto the needle.
After the thread is pulled through the needle, it should be looped through the tension discs found at the top of the machine and then fed underneath the presser foot. Following this, the user needs to ensure that the thread is correctly wound around the bobbin before it can be properly threaded.
Using the Foot Pedal
In order to begin sewing, the user must attach the foot pedal. This is a small metal device which is inserted into the lower base of the machine and should be used to operate the machine. When pressed down, the foot pedal will start the machine, while pressing it up will pause. It should be noted that the machine will not operate correctly if the foot pedal is not correctly attached.
Setting the Stitch Length
Finally, before the machine will be ready to start sewing, the user must set the stitch length. This part of the process is relatively straightforward and should be indicated in the instruction booklet, depending on the model. Most commonly the stitch length is set by sing a small button located near the top of the machine, if this button is not present the user may need to refer to the instruction booklet.
Cleaning the Sewing Machine
Regular maintenance is essential when owning a Brother sewing machine, and this should include regularly cleaning the device. To do this, the user should start by switching off the power and unplugging it from the power source. The machine should now be tilted to the side and the user should gently remove any built-up dust or debris.
For more thorough cleaning, the machine can be wiped down with an appropriate fabric cleaner. This should be applied using a soft cloth and should be gently dabbed over the machine. Once wiped down the user should wait until it is dry before plugging it back in and switching it back on.
Choosing the Right Needles
When appropriate for the material and project, using the correct needled is essential when using a Brother Sewing machine. This can be done by selecting from the range of needles provided and checking in the instruction booklet which type of needle is the most suitable. Typically, this will depend on the fabric being used, however other factors such as the stitch type, tension levels and needle size all need to be considered.
Checking Tension Settings
It is important to be mindful of the tension settings when using a Brother sewing machine. This is done by checking the tension wheel near the top and ensuring that it is correctly set. This will be indicated by a number indicated on the wheel itself and this should be adjusted if necessary. Too much tension can cause issues with the fabric, while not enough tension may cause the needle to break.
Setting Up a Brother Sewing Machine
When putting together a Brother sewing machine, it is important to pay attention to any instructions provided. This will usually be done by referring to the instruction booklet or to any provided diagrams. Following this, it should be relatively straightforward to assemble the machine and make sure all the components are securely fitted.
It is also important to check the power source and make sure that the cable is connected correctly. Once this is done the user should be able to start sewing almost immediately. It is also beneficial to regularly maintain the device by cleaning it periodically and keeping an eye on tension settings. Finally, by having the correct needles and following steps correctly, the user should be ready to start sewing with ease.
