Whether you are a beginner or an expert, learning how to thread a Singer handheld sewing machine is an important part of using this type of machine. Handheld sewing machines, while they can lack some of the features of traditional machines, are incredibly easy to use and highly portable. This makes them ideal for taking on the road, to classes or just for everyday repairs and small projects. Knowing how to thread a Singer handheld sewing machine is key to getting the most out of this type of machine and the projects you undertake.
In order to start threading a Singer handheld sewing machine, you first need to make sure that the machine is turned off. Once it is off, open the top cover of the machine and look for a small plastic tube with a slit in the end. This is called a bobbin case. The bobbin case holds the bobbin, which will carry the thread from the spool to the needle. Place the bobbin inside the bobbin case, making sure that the thread runs in the same direction as the arrow. Close the bobbin case and thread the machine.
After you have placed the bobbin inside the bobbin case, the next step is to thread the machine. To do this, lift up the needle threader and place the thread through the eye of the needle. Make sure you pull the thread until it is taut, then feed the thread through the thread guide. From there, the thread should go through the threading channel, the tension disc, and the take up lever. The tension disc should be adjusted so that it is just tight enough for the thread to easily pass through. From there, draw the thread around the back through the needle threader, and then loop it around the spool pin.
Once the machine is threaded, you can then install the needle. Make sure to match the needle with the size of thread you are using; the size is printed on the needle. When threading the needle, insert it from the front of the machine with the flat side of the needle facing towards the back. Once it is in the machine, tighten the screw at the top of the machine until secure. Finally, draw the thread up and under the needle before turning on the power.
Using a Singer handheld sewing machine can improve the seam quality of your work, making stitching more accurate and easier to manage. Knowing how to thread a Singer handheld sewing machine is the first step to becoming proficient at this type of machine. Take the time to learn and understand the steps of threading a Singer handheld sewing machine, and soon enough you’ll be an expert seamstress.
How to Wind the Bobbin
Once the needle is threaded, the next step is to wind the bobbin. To do this, start by placing the bobbin on the winder. Make sure the thread is coming off the spool in the same direction as the arrow on the bobbin, then attach the bobbin to the winder. To begin winding the bobbin, turn on the power switch, then press the button to start winding. As the bobbin winds, place the thread between the tension discs. Once the bobbin is full and the winding stops, cut the thread and remove the bobbin from the winder.
Adjusting Tension
Adjusting the tension of the needle thread is important to ensure good quality stitching. To adjust the tension, start by turning the tension control knob to the left side. Slightly loosen the presser foot, then turn the needle threader tension dial towards the right. Once it is in the correct position, you can use a ruler or a pair of tweezers to adjust the tension of the needle thread. To test the tension, pull a length of thread across the fabric and adjust accordingly until it feels correct.
Threading the Fabric
Once the machine is threaded, the next step is to thread the fabric. Start by folding the fabric in half along the longest edge and pinching the middle to mark the center. Make sure the fabric is properly aligned, then place it inside the presser foot of the machine. Move the presser foot back and forth until the fabric is securely secured. Then, select the desired stitch and begin stitching the fabric by guiding it through the needle.
Lubricating and Cleaning the Machine
It is important to take care of your machine in order to ensure that it continues to work efficiently and effectively. To do this, it is important to lubricate the machine and keep it clean. To lubricate the machine, you can use a drop of synthetic lubricant and apply it to moving parts such as the needle bar, the wheels and the spool pin. Use a soft cloth to wipe away any dust or debris that has accumulated and make sure to oil the parts that need it. Additionally, it is important to clean the bobbin case to ensure that the thread does not become tangled or knotted.
Correctly Storing the Machine
To keep your Singer handheld sewing machine in the best condition, it’s important to store it correctly when not in use. To store your machine, turn off the power and remove the needle and thread. Place it in a safe, dry place and make sure that the bobbin is stored in the case or in a box with the thread still threaded. If possible, keep the machine away from extreme temperatures and away from sunlight. If the machine is in storage for an extended period of time, oil the moving parts and ensure that the machine remains clean.
Maintenance and Troubleshooting
It is important to properly maintain your Singer handheld sewing machine in order to prolong its life and ensure accurate stitching. Regular maintenance should include cleaning the machine and checking for wear and tear. Additionally, it is important to troubleshoot any issues you may come across with the machine. If the fabric is not feeding through the machine, check the threading and ensure the tension is set correctly. If something is stuck in the machine, use a pair of tweezers to remove it. If the stitches are not forming correctly, make sure the presser foot is installed correctly and that the needle is threaded properly.
