Essential Tools for Filling a Bobbin
Filling a bobbin on a white sewing machine is imperative for any seamstress. An adequate bobbin size and weight is necessary for any good and sturdy piece of clothing. Knowing how to fill a bobbin and having the right tools for the job is of the utmost importance. The tools necessary for filling a bobbin on a white sewing machine are a spindle, bobbin case, bobbin and a bobbin winder.
The spindle of a sewing machine holds the bobbin in place while the bobbin winder winds the bobbin. The spindle is connected to the motor of the machine and the bobbin is inserted onto the spindle shaft. As the motor turns the spindle, the thread is wound around the bobbin. The bobbin case is necessary to keep the bobbin in place while sewing and prevents the thread from getting tangled. The bobbin winder is used to securely wind the bobbin.
Prepping the Bobbin Before Filling
Before filling a bobbin with thread, it is important to check the tension of the thread on the bobbin. To do this, simple move the thread through the eye of the bobbin and feel for any resistance. If the thread does not move freely through the eye, it indicates that the tension may be too tight. It is important to also make sure that the bobbin is the right size for the sewing machine that is being used. If the bobbin is too big or too small, it may cause problems when sewing.
The next step is to thread the bobbin with the correct type of thread. Sewers should use the same type of thread that is on the sewing machine spool, either cotton or polyester. The wrong type of thread may be difficult to sew with and can damage the fabric. The correct type of thread should be determined by the fabric that is being sewn. Cotton and polyester thread both have their advantages, depending on the fabric that is being sewn.
Filling the Bobbin and Setting the Tension
Once the bobbin is threaded and the tension has been checked, it is time to begin filling the bobbin. To begin filling the bobbin; the bobbin should be placed over the bobbin winder, and the winder should be set to the highest setting. The motor should be started, and the thread should be pulled through the bobbin eye and winder case. The thread should be held in the left hand while turning the bobbin winder with the right.
The bobbin should be filled gradually, as too much thread can cause the bobbin to become unbalanced and cause it to spin faster than the machine motor. As the bobbin starts to fill, the tension should be adjusted. Holding the thread between the index finger and thumb, the amount of thread should be adjusted until the thread feels neither too tight nor too loose. When the bobbin is filled, the motor should be stopped and the bobbin can be removed from the winder.
Placing The Bobbin In The Sewing Machine
The final step is to place the bobbin in the sewing machine. The bobbin should be placed into the bobbin case before it is inserted into the machine. Placing the bobbin into the case helps to hold the thread in place and prevents it from getting tangled. It is important to make sure that the thread is pulled through the slot at the top of the bobbin case and then the bobbin should be inserted into the bobbin case.
The bobbin case should then be placed into the machine. The bobbin should fit snugly into the machine and should not come loose when sewing. This ensures that the thread will remain taut and prevent the fabric from bunching up or getting caught in the machine.
Using the Bobbin Correctly
Once the bobbin is in place, it is important to make sure it is being used correctly. The bobbin should not be pulled out every few pieces of fabric, as this causes the thread to become unbalanced and may cause the machine to jam. To make sure the bobbin is being used correctly, the thread should be pulled through the tension disks of the machine and hold the thread firmly when sewing.
To ensure that the bobbin is wound correctly and functioning at its best; the bobbin should be checked after every few pieces of fabric. If the bobbin is damaged or too tight, it should be rewound or replaced. If the bobbin is wound too loosely, it can cause the thread to become tangled or slip off the bobbin, resulting in a broken stitch or an incomplete seam.
Checking the Stitch
The last step in filling the bobbin is to check the stitch. It is important to make sure that the stitch is even and secure when sewing. If the stitch is not even, it may cause the fabric to bunch up or become uneven. An even and sturdy stitch is essential for any seamstress and will ensure that the fabric is sewn securely.
It is also important to check the thread tension of the machine. The tension should be adjusted depending on the fabric and thread being used. If the tension is too tight or too loose, it can result in a stitch that is too tight or too loose. If the tension is not adjustable, the thread should be changed until an even stitch is achieved.
Conclusion
Filling a bobbin on a white sewing machine is an essential skill for any seamstress. It is important to have the correct tools for the job and to use the correct type of thread for the fabric being sewn. It is also important to set the thread tension correctly, both on the bobbin and on the machine, to achieve an even and secure stitch. By following these steps, a bobbin can be filled correctly and securely, and will ensure a smooth and secure sewing experience.
