Tools Needed
Before you start, you will need a few basic tools to help you fix your Kenmore sewing machine. These include a screwdriver, needle-nose pliers, tweezers and a pair of scissors. You’ll also need new screwdrivers, thread, needles, and bobbins if parts of the machine need to be replaced.
Keeping these tools nearby will make the job a lot easier and quicker, so you should take the time to familiarize yourself with the basics. Knowing what tools you need and how to use them can save you a lot of time and effort, and give you a better understanding of how the machine works.
Check the Model Number
Once you have the right tools, you will need to make sure you’re dealing with the right model of Kenmore sewing machine. The model number can usually be found on the side or bottom of the machine and should be clearly visible and easy to identify.
Once you have the model number, you can look up the manuals online and find the parts diagrams as well as the Kenmore sewing machine parts that you’ll need to fix the problem. This makes it much easier to order the right parts from an authorized dealer or an online store.
Disassemble
Once you have the model number and the necessary parts to fix the machine, you can begin taking it apart. Start by removing the foot pedal, motor, and tension plate. Be sure to note where each piece goes and how it should be put together once you’ve fixed the problem.
Next, detach the bobbin case and check that all the parts are moving as they should. If there is a blockage or any other kind of obstruction, you can use tweezers to remove it. Then reassemble it and check it again to ensure everything is correctly in place.
Replace the Damaged Parts
When replacing the damaged parts, always use the right materials and make sure they are securely fastened. This will help ensure that the machine runs smoothly and works properly.
If you need to replace the needle, first ensure that it is the correct size and type for your machine. Once you have the correct needle, you can use needle-nose pliers to loosen and remove the old needle. Then insert the new needle and use the screwdriver to secure it.
Adjust the Tension
One of the most important steps in fixing a Kenmore sewing machine is ensuring the tension is set correctly. The tension can be adjusted easily by turning the tension knob or dial. You can adjust the tension depending on the kind of fabric and thread you are using.
To adjust the tension, first stretch the fabric over the bobbin case. Then hold the tension wheel with one hand and turn the tension knob with the other. Keep adjusting the tension until the machine runs smoothly.
Install the Foot Controller
Once you have replaced the damaged parts and adjusted the tension, you can begin installing the foot controller. This is the pedal that allows you to control the speed of the machine when sewing.
To install the foot controller, first attach the bracket to the machine. Make sure that the bracket is secure and fits properly. Then attach the foot controller to the bracket and connect it to the power supply.
Clean and Lubricate the Machine
The last step in fixing a Kenmore sewing machine is to clean and lubricate it. This will help make sure that the machine works properly and doesn’t get clogged up with yarn or dust.
To clean the machine, you can use a damp cloth to remove any dust or yarn particles. Then use a small brush to clean out any crevices or hard-to-reach places. Finally, use a machine lubricant to lubricate all the moving parts of the machine.
