Introduction
It’s essential to get your Janome Sewing Machine back up and running swiftly, especially if you’re a professional tailor or seamstress. To fix timing on your machine, you’ll need knowledge of the relevant components and an understanding of how they interact. Fortunately, it’s a straightforward process that requires only minimal expertise.
Step One – Identify Components
Understanding the various components of a Janome Sewing Machine is crucial. There are five key components that make up the device: needle position, presser foot, threading system, bobbin, and stitch length regulator. User manuals outline the exact positions of each component and therefore it is important to familiarise yourself with the machine.
Step Two – Check for Loose Connections
In order to ensure the timing is correctly set, you’ll need to check for any loose connections. Each of the five components is connected to an accompanying part and make sure that they aren’t loose, particularly the needle position and presser foot. That’s because when they aren’t properly secured the whole timing system on your machine can be affected.
Step Three – Check Connected Cords
In addition to checking for any loose connections, it’s important to check any cords connected to the components. It’s essential to be sure that they are plugged in securely – any slight movement can affect the machine’s timing. So, make sure that all cords connected to the components are secure and firmly plugged in. If any cords appear to be damaged, then it’s best to get them replaced.
Step Four – Check Stitch Regulation System
An important component of the timing system is the stitch regulation system. This is designed to ensure that the stitches are of a consistent width and length throughout each project. To ensure the timing is correct, the stitch regulation system must be in full working order. It’s important to choose the correct tension, and then to practice stitching on scrap fabric before beginning a project – this will help to prevent any issues with the stitch regulation system.
Step Five – Adjust Bobbin Tension
The bobbin tension is integral to the machine’s timing system. If the bobbin is too loose, then the stitches won’t be even. To adjust the bobbin tension, you can turn the screw located on the bobbin holder until you notice a slight resistance when pulling the thread. Once the bobbin tension has been adjusted, you should be able to finish your projects with perfect, even stitching.
Clean and Lubricate
It’s important to clean the machine regularly and then lubricate the components to ensure that it runs correctly each and every time. You should also check the needle for any bent sections and replace it accordingly. That’s because a bent needle will not produce even stitches. Once you have made sure that the needle is in perfect condition, thread the needle and stitch away.
Conclusion
Overall, fixing the timing on your Janome Sewing Machine is a relatively straightforward task and one that should be done by all experienced sewers. In addition to these core steps, it’s important to regularly check and fine-tune the components of the sewing machine to prolong its lifespan and maintain perfect timing.
