How To Insert Bobbin In Mini Sewing Machine
Making your own clothes and other items has become a popular trend these days and a mini sewing machine has become an essential part of it. However, if you are new to this hobby, then you need to know the basics of how to insert a bobbin in your mini sewing machine. Inserting the bobbin sounds difficult but it is actually quite simple and you can quickly master this skill with a bit of practice.
To begin with, you need to make sure that your machine is powered off before you start inserting the bobbin. Place the bobbin over the spool pin and then push it gently downwards making sure that it moves in a circular motion. After this, you will need to thread the machine with the upper thread spool before tightening the tension of the thread as well as the pressure foot.
When you are sure that these steps are done, you can easily pull the bobbin thread and hold it around the shuttle hook. After this, you should press the bobbin winder to tighten the bobbin thread and then the bobbin case needs to be snapped back in its place. To ensure that the bobbin is secured properly, you will have to make sure that the bobbin case is pushed back in a way that its latch hook locks in the grove of the spool pin.
Now you can start testing your handiwork by turning the wheel in the forward motion and this will ensure that the machine is threaded properly and the spool is moving. After this, press the reverse lever and turn the wheel to make sure that the bobbin thread and upper thread are intertwined with each other.
Last but not the least, check if the bobbin winder is working properly by turning it in a clockwise direction and make sure that it is moving freely. Expert advice to always test the bobbin in a scrap fabric before you start your project. If you face any issue in the testing, then you should check the tension, rethread the needle and then start all over again.
Cleaning and Maintenance
Regular maintenance and cleaning of the mini sewing machine will not only help you to keep it in a good working condition, but it will also help you to prevent any issues in the future. Firstly, you need to remove the entire bobbin case which should unlock when you press down the case latch. After this, clean the entire area within the machine body and ensure that there is no dust and lint buildup.
Inspect the bobbin case thoroughly and if you need to, lubricate its moving parts with sewing machine oil. If it is too dirty, then you should disassemble the case and then wash it in soapy warm water. Before inserting the case again, make sure that you have dried it properly and that all the dirt and lint has been removed.
You can also give the bobbin casing a polish for better performance and make sure that you replace it back in its position properly. Finally, it is always recommended to consult a professional or refer to the manual if you are stuck with cleaning or inserting the bobbin.
Extra Tips
Most sewing machines come with different models and if you are switching between them, then it is important to understand each model carefully before inserting the bobbin. Do not forget to switch off the machine before attempting to change the bobbin and ensure that your hands are clean at all times.
It is also important to know the type of bobbin your machine is compatible with because some machines only work with specific bobbins. Make sure to clean the presser foot of your machine often because dirt and lint can affect the performance of your machine. Finally, understanding the thread tension is important in order to make sure that your machine works smoothly.
Important Things To Remember
Always make sure to turn off the machine before you begin any inserting/removing process. Also, make sure that your hands are always clean as dirt and lint can get into the mechanism and cause damage. Before you start, it is important to inspect the bobbin winding and make sure that it is running smoothly.
Refer the manual carefully so that you can understand the specific features of your mini sewing machine. If you are stuck in a particular step, then you can always call customer service and get your queries answered. Moreover, make sure that you are working in a well-lit and well-ventilated area so that you can witness all the tiny details before starting to insert the bobbin.
Conclusion
Inserting a bobbin in a mini sewing machine is an important skill to learn and practice in order to make sure that your machine works perfectly. By making sure that the bobbin is properly hooked in the machine, you will not only get a better performance, but you will also be able to extend the life of your sewing machine.
