In this tutorial, you will learn how to make a headband with fabric by sewing machine. This is a quick and easy project that you can complete in just a few minutes. You will need a piece of fabric, a sewing machine, and a headband.
Picking the right fabrics and cutting them in precise strips are the keys to making a beautiful and professional-looking fabric headband.
1. Measure and cut a strip of fabric. The fabric should be twice as wide as the desired finished headband and long enough to wrap around your head plus 1 inch.
2. Fold the fabric in half lengthwise, wrong sides together.
3. Sew the long side of the fabric strip together, using a 1/4-inch seam allowance.
4. Turn the tube of fabric right side out and press flat.
5. Fold one end of the tube in 1/2 inch and press. Sew the end closed.
6. Fold the band in half and mark the center with a pin.
7. Sew a gathering stitch along the other long side of the band, 1/4 inch from the edge. Do not backstitch at the beginning or end of the seam.
8. Pull the gathering threads to gather the fabric until the band is the same circumference as the headband.
9. Pin the band in place and sew it to the headband.
What stitch is best for a headband?
To sew together long edges of headband fabric pieces, use a long narrow zigzag stitch, a three-point zigzag stitch or overcast stitch. After sewing the zigzag or stretch stitch to the long edges, remove the basting stitches.
I would definitely recommend using a polyester knit for this project instead of a cotton knit. It’s much less bulky and has a much better stretch, which is what you want for a headband.
How many yards of fabric do I need for a headband
If you’re looking to make your own headband, you’ll need a stretchy knit fabric (like jersey) in the colors of your choice, and matching thread. You’ll need about ⅛ yard of fabric total.
To make a fabric headband, you will need:
-1/4 yard of lightweight fabric
-matching thread
-scissors
-headband
-glue gun
Instructions:
1. Cut a strip of fabric that is 2 inches wide and 28 inches long.
2. Fold the strip in half lengthwise and press.
3. Sew the long side of the strip together with a 1/4 inch seam allowance.
4. Turn the strip right side out and press.
5. Fold the strip in half and slide it over the headband.
6. Glue the strip in place.
7. Trim the ends of the strip if necessary.
How do you make a stretchy fabric headband?
So to be able to cut these you need to make sure that the stretchy side goes the longest way so that you can have a straight cut. If the fabric is not cut straight then it will not lay flat and will not look as nice. Also, you need to make sure that you use a rotary cutter and not scissors.
If you want to make a narrow headband, you should cast on enough stitches to equal four inches. For a wider headband, you should cast on even more stitches. The gauge for a worsted weight yarn might be listed as 16 stitches to 4 inches, so you could cast on 16 stitches for a 4-inch wide headband.
What stitch keeps fabric stretchy?
The zigzag stitch is a great option for sewing machines as it allows the fabric to stretch and retract with the thread. The twin needle will do two rows of zigzag stitching, offering a more secure stitch with a professional finish.
Cut the Fabric and Elastic
Cut out two fabric pieces: one 18″ x 4¾” and one 9″ x 1¾”.
Fold and Press
Fold both fabric pieces lengthwise in half, right sides together, and press along the folded edge.
Stitch the Edges Together
Stitch the long edges together with a ⅜” seam allowance, leaving the short ends open.
Press the Headband
Turn the headband right side out and press flat.
Press the Ends
Fold in the raw edges of the open end ¼” and press.
Make the Elastic Portion
Fold the elastic in half and stitch the ends together with a ⅜” seam allowance.
Attach the Elastic
Thread the elastic through the headband and stitch the ends together.
How long should a fabric headband be
To make your headbands you’ll need: Stretch knit fabric, 18 inches long* by 4 to 8 inches wide Your final headband will be the (width of your fabric minus 1 inch) divided by 2, so keep that in mind to decide on the width you want to use.
To tie a basic knot, start by holding the center of the rope in one hand. Then, cross it over and make a loose knot. Finally, bring the short ends together and tighten the knot.
How wide should a headband be?
A headband or ear warmer should be about 4″ wide. This is the perfect size to cover ears and keep you warm. You could change this easily if you’d like it smaller or even wider.
To make a headband, start by measuring your head. Then, cut a strip of fabric that is long enough to wrap around your head plus 1 inch. Next, fold the fabric in half lengthwise and sew the long side together. Then, turn the headband right side out and sew the short ends together. Finally, wear your headband!
What is the average width of a headband
For toddlers, the average headband size is 16-18”. The head circumference is 18-19”.
There are two great ways to attach fabric without sewing: fabric glue or a fusible bonding tape like Dritz Stitch Witchery. If you have a sewing machine, sewing is often still the fastest and most reliable method for many projects, but fabric glue or Stitch Witchery are great alternatives.
How do you connect fabric pieces together?
Place the fabric pieces under the presser foot align The fabric edge with the half inch marking on the throat plate. If the fabric edge is not aligned with the half inch throat plate marking, the fabric will not be fed through the machine correctly and you will end up with an uneven seam.
If you’re looking for a comfortable, stylish and versatile headband option, look no further than cloth headbands! These headbands are perfect for keeping your hair out of your face during any activity, from working out to running errands. They’re also absorbent, so they’ll keep you cool and dry even during the most strenuous activities. Plus, they come in a variety of colors and styles to suit any taste.
What size elastic for headbands
There are three different widths for this elastic, 1/8″, 3/8″, and 5/8″. The most commonly used width for headbands is 3/8″, but some people prefer the thinner 1/8″ headband, especially for babies.
So it’s just a few extra inches to allow me to tie that knot okay it couldn’t be more simple you think. But trying to add a few extra inches to your height can be a challenge. There are a few things you can do to add a few extra inches to your height. First, try to stand up straight. This will give you the appearance of being taller. Second, try to wear clothing that is not too baggy or loose. This will make you look taller and more slender. Finally, try to avoid high heels. Wearing high heels will actually make you look shorter. If you follow these tips, you should be able to add a few extra inches to your height.
Warp Up
1. Cut a strip of fabric about 2 inches wide and long enough to wrap around your head.
2. Fold the strip in half lengthwise and sew the raw edges together with a sewing machine.
3. Trim any excess fabric and turn the headband right side out.
4. Sew a few stitches across the top of the headband to secure it in place.
With just a few supplies and a little bit of time, you can sew a fabric headband that’s both stylish and comfortable to wear. To get started, you’ll need a small piece of fabric (about 12″ x 6″), a sewing machine, and thread. Once you have your supplies, simply follow these steps:
1. Fold the fabric in half lengthwise, wrong sides together.
2. Sew the long side of the fabric together, using a ½” seam allowance.
3. Turn the fabric right side out and press.
4. Fold the fabric in half again, this time widthwise.
5. Sew the short ends of the fabric together, using a ½” seam allowance.
6. Turn the fabric right side out and press.
7. Try the headband on for size and trim the ends if necessary.
8. Sew a small seam along each end of the headband to finish.
There you have it—an easy-to-sew fabric headband that you can make in just a few minutes. With so many fabric options available, the possibilities are endless. So get creative and have fun sewing your own unique headband!
