Step-by-Step Guide for Oil Change
If you own a Singer 4452 sewing machine, you need to make sure that it is regularly serviced and lubricated, to keep it running smoothly. An oil change should take place every month or so, depending on how often the machine is used. Here is an easy step-by-step guide on how to oil your Singer 4452 sewing machine.
Prepare Your Work Area
Before oiling your sewing machine, make sure you have all the necessary supplies on hand. You will need a small container of Singer brand oil, a cotton cloth, a few tiny screwdrivers and a brush. Also, make sure you have a work surface that is strong and stable, as the machine will be opened up during the oiling process.
Remove the Cover
To gain access to the parts of the machine that need to be lubricated, the cover must be removed first. To do this, you will need to use a small screwdriver or a set of sewing machine screwdrivers.
Start at the front of the machine and remove the screws from the cover, then carefully lift the cover off the machine. Be sure to place the cover aside in a safe location and do not lose the screws.
Locate the Oiling Points
Once the cover is removed, it is easy to locate the oiling points on the Singer 4452 sewing machine. These points typically include the shuttle hook, bobbin winder, hook race, needle bar, and the drive shaft.
Using the cotton cloth, dab a small amount of the Singer oil onto each of the oiling points. Just a few drops are sufficient. Make sure to get all of the points, as this ensures that all parts are properly lubricated.
Clean the Threads and Needles
Now that the oiling points have been oiled, it is time to clean out the threads and needles. Take the brush and gently clean out the threads that have built up inside the machine, as well as around the needles. This will help to keep the machine running smoothly and prevent any jams from occurring.
Once the threads and needles have been cleaned, it is time to put the cover back onto the machine. For this, simply use the screwdriver to tighten all of the screws back into place.
Test Run and Maintenance
The last step is to perform a test run of the machine, to make sure that everything is running smoothly. Turn the machine on and run the thread through the machine, making sure that all of the needle bars, hook races, and drive shaft are properly functioning.
Lastly, make sure to keep track of when the next oil change is due. Usually, it is best to lubricate the machine every month or so, depending on how often it is used.
Conclusion
Oil changes are essential for increasing the lifespan of sewing machines, and making sure that they are running smoothly. With this step-by-step guide, you can easily oil your Singer 4452 sewing machine, thereby prolonging its life and keeping it running smoothly for many years to come.
