How To Oil Singer Stylist Sewing Machine

When owning and using a Singer Stylist Sewing Machine, having the machine properly lubricated is an important part of the regular maintenance of the machine. Not only does sewing on a properly oiled machine create a smoother, quieter operation, it will also extend the life of the machine. This article will discuss the process of oiling a Singer Stylist Sewing Machine, as well as the benefits of doing so.

Oiling a Singer Stylist sewing machine is a simple process that requires two types of oil: Singer Sew-Lube, and Singer Sew-Lite. Each should be used in specific places on the machine, depending on the type and amount of lubrication required.

Before oiling a Singer Stylist sewing machine, it is important to always make sure the machine is unplugged and turned off. Next, the machine should be lowered and the feed dogs should be disengaged. This will allow access to the oiling points beneath the bed of the machine.

Singer Sew-Lube oil should be used for the oiling points located in the shuttle and hook area. This oil is thicker and is designed for use with moving parts in the needle and thread system of the machine. To get to these points, the machine bed must be carefully pulled back, exposing the shuttle area. Singer Sew-Lite should be used for oiling points located in the shaft and bearing points within the machine. These points are located in the internal areas of the machine, beneath the machine bed and often in hard-to-reach areas.

A small needle can be used to apply the oil, making sure to just add a drop or two to each oiling point. It is recommended that both types of oils be changed every six months. Excess oil should be immediately wiped away with a cloth, as this could cause a build-up of oil on the machine and make it operate sluggishly.

By oiling a Singer Stylist sewing machine regularly, the life of the machine will be extended. The machine will run more smoothly, with less friction and noise. It will also save users time, as the machine will be able to run faster, and require less effort from users to operate.

What are Other Maintenance Procedures for Singer Stylist Sewing Machine?

In addition to oiling the Singer Stylist Sewing Machine, there are a few other maintenance procedures that should be performed in order to ensure the machine continues to work properly and that its life is extended. These include cleaning the machine, as well as testing the machine’s tension.

To clean a Singer Stylist Sewing Machine, a damp cloth should be used to remove any dirt or debris that may have accumulated in and around the machine. Cleaning should be done after every project and before any major maintenance is done to the machine.

Testing the tension on the Singer Stylist Sewing Machine after its been cleaning is also important to maintain the machine’s performance. The tension should be adjusted every 6 to 12 months, as this will help the machine stitch properly, even when different fabric thicknesses and weights are used.

Another maintenance procedure that should be completed on a regular basis is oiling the bobbin case, as this will help ensure the bobbin is functioning correctly. A few drops of oil should be added to the bobbin case and the needle should be raised and lowered several times to ensure the bobbin case is oiled evenly.

Finally, all of the machine’s parts should be inspected for wear and tear on a regular basis. This includes inspecting the needle for any damage, as well as checking the machine’s thread path for any blockages, or broken or worn parts.

What are the Benefits of Oiling Singer Stylist Sewing Machine?

Apart from the obvious advantage of extending the life of a Singer Stylist Sewing Machine, properly oiling the machine also has other benefits. Those include reducing the noise and friction of the machine, as well as making sure the machine runs smoothly and efficiently.

Oil also helps to protect the mechanisms of the machine, as it reduces wear and tear on moving parts and keeps the machine running properly. Proper oiling also helps the machine to maintain its tension, reducing the amount of time spent making adjustments in order to get the desired results.

By investing a bit of time into properly oiling a Singer Stylist Sewing Machine, not only will it run better and more efficiently, but it will also last significantly longer than a machine that isn’t oiled on a regular basis.

What Tools Are Needed For Oiling Singer Stylist Sewing Machine?

In order to oil a Singer Stylist Sewing Machine, there are several tools that are needed for the job. These include Singer Sew-Lube oil and Singer Sew-Lite oil as previously mentioned, and a small needle or other similar device for applying the oil, and a cloth for wiping away any excess oil when finished.

It is also important to have a light to shine in the area where the oil is being applied, in order to ensure the oil is applied correctly. A pair of tweezers, needle-nose pliers, and a flashlight can also come in handy for this task, as they allow for better access to tight spots, or hard-to-reach areas.

In some cases a screwdriver may be required to access certain areas of the machine in order to oil it, so having one of these on hand is also recommended. Finally, it is important to make sure the machine is turned off and unplugged before beginning the maintenance process.

What Are Other Ways To Take Care of Singer Stylist Sewing Machine?

Aside from regularly oiling the machine, caring for a Singer Stylist Sewing Machine also includes other preventative maintenance procedures. These include regularly cleaning and inspecting the machine for wear and tear, as well as checking its thread tension.

It is also important to store the machine in a cool and dry area to protect it from excessive heat and sunlight. Another important point is to always ensure the machine is returned to its normal upright position before sewing, as this will ensure the tension is maintained and the needle is seated correctly.

Regular maintenance, such as oiling and cleaning, are important for the longevity of a Singer Stylist Sewing Machine. Properly oiling the machine will reduce noise and friction, while making it run smoother and more efficiently. It is also important to make sure other maintenance procedures are completed on a regular basis, such as testing the machine’s tension, cleaning, and inspecting the needle and thread path. By taking the time to properly care for a Singer Stylist Sewing Machine, it will last much longer and users can be sure they are getting the best performance possible from the machine.

Geoffrey Kirby is an experienced author and sewist who has been creating sewn projects for over 20 years. He has a passion for teaching beginners and inspiring more advanced sewists both online and through his writings. Outside of writing about sewing, Geoffrey loves to explore new techniques and styles of sewing that incorporate upcycling fabric remnants into sweet items with personality.

Leave a Comment