Threading the Bobbin
Bobbins are the small spools needed to store the thread when using a sewing machine. The bobbin case contains the bobbin and, when inserted into the machine, the thread from the bobbin forms the ‘bobbin thread’. Learning how to place the bobbin in the machine and wind it properly is essential in order to improve one’s sewing skills.
Place the Bobbin
The bobbin is a flat, small spool, made of plastic or metal, which contains thread which feeds the underside of the fabric. Finding the right position of the bobbin in the machine is a key step, as incorrect placement will cause tension and threading problems. To correctly place the bobbin, remove the top plate by pressing the latch. The next step is to slide the bobbin case into the machine, taking care not to saturate the spool in the process. The bobbin is inserted from the front side and is secured in place with a latch. Then, lift the shuttle cover and slide the bobbin in the shuttle. The last step is to close the cover.
How to Wind the Bobbin
Once the bobbin is correctly inserted into the machine, it must be wound properly. To achieve this, firstly, press the spool pin, so the spool will spin, and then start the machine slowly. The right pedal must be pressed to activate the sewing machine and start winding the bobbin. As the spool is wound, it is advised to hold the thread with one hand while continuing to wind. Once the bobbin is full, press with the finger the back-tension button and the bobbin will stop spinning. Cut the thread and the winding process is finished.
How to Remove Bobbin
Instead of hydrating the old spool of thread, the bobbin should be changed whenever there is no more thread left. Removing the bobbin is as simple as inserting it. Firstly, stop the machine and press the latch of the bobbin case. Then, slightly pull the cover and remove the spool from the case. Press the back-tension button and the bobbin will be ready to be removed from the machine.
Troubleshooting
If the bobbin is not placed correctly, the thread might get a kink or there might be too much tension. To check if the bobbin is properly placed, slowly turn the wheel at the side of the machine, and observe if the bottom thread comes up through the needle plate. If it doesn’t, there is a tension problem and the bobbin case must be checked. If the bottom thread is tangled it could indicate that the bobbin was inserted in the wrong way.
Maintenance
For the machine to maintain its best performance, it is important to take proper care. Cleaning the bobbin case regularly is one of the key steps towards understanding how to place the bobbin in a Singer sewing machine properly. This should be done every time the bobbin is changed. The bobbin case should be wiped down to make sure no lint or dust remains in it. If the bobbin is not wound or placed properly, the fabric won’t be sewn properly, so it’s important to check the condition of bobbins and the threads regularly.
Conclusion: Choose the Right Bobbin
Finally, it is important to use bobbins that match the machine; use the correct size and material for the sewing machine. The diameter of the bobbin needs to match the one indicated by the machine, and the material should be appropriate for the type of thread being used. Using the correct bobbin will guarantee good stitches and a professional-looking result.
Prepare the Bobbin Casing
Different machines may require different kinds of casings, so it is important to understand the type of bobbin casing the machine requires. Hydrate the casing, particularly if it has not been used for a long period of time and make sure it is properly placed inside the machine. Various parts must be removed- the presser foot and the throat plate- and the bobbin casing should be carefully placed.
Position the Bobbin Inside the Casing
When inserting the bobbin into the casing, hold the spool horizontally and insert it correctly. Pull any excess thread from the threading and spool it through the tension disc. Gently close the bobbin casing lid or snap and run the machine for a few seconds, to make sure everything is working correctly. Then, thread the upper thread on the machine, taking into account the right threading sequence provided by the machine’s manual.
Thread the Needle and Check Threading
Threading the needle and check the threading are the last steps when learning how to place bobbin in a Singer sewing machine. To thread the needle, just pull the thread from the spool and thread it backward. Then pass it through the needle from the bottom. Finally, spread the thread in both directions, to see if the correct needle to thread path is made.
Start Sewing Projects with Bobbin in Place
After the correct bobbin has been inserted and the machine is properly threaded, the sewing projects can start. Singer machines are perfect for outdoor projects; using compatible fabrics, water resistant stitches can be made. Additionally, with the correct bobbin and thread, one can also make invisible seams and lightweight papers. Enjoy your sewing machine and every project it produces!
