How to put bobbin in mini sewing machine
While the full-size sewing machine might be seen as the sewing implement of choice for most households and businesses, a mini sewing machine can be just as effective for simple tasks. Whether you’re doing a quick hem or stitching pieces of fabric together, a mini sewing machine can be perfect for small jobs and right away. Before you start using any type of sewing machine, it is vital that you know how to thread it and set it up correctly, including putting in the bobbin.
The bobbin is the small, spool-shaped device that holds the bottom thread in the sewing machine and creates the stitches in the finished fabric. Without the bobbin correctly installed in the machine, it won’t be able to create a stitch at all.
Putting in a bobbin into a mini sewing machine is a relatively straightforward task — with just a few simple steps, you can be up and running in no time. Keep in mind that the exact process for putting a bobbin into mini machines of different sizes and models is likely to change slightly, so you should refer to your manual for the specific instructions for your machine if needed. Here’s a general overview of how you should be doing it:
1. Check That the Machine is Off
Before you do anything, make sure that the power to the machine is off. Once you have located the bobbin and its compartment, you should turn the power off to the machine entirely so that you do not get any shocks while threading it.
2. Locate the Bobbin Compartment
Mini machines usually have a removable plate on the front or side of the machine to access the bobbin compartment. Refer to your manual for instructions if you cannot find it, as the location of the compartment can vary from machine to machine.
3. Place Bobbin in the Compartment
Next, you need to place the bobbin in the provided bobbin-compartment. Make sure that it is facing the correct way and that it fits snugly into the compartment itself.
4. Pull the Thread through the Compartment
Once the bobbin is firmly in place, you will want to pull out a few inches of thread through the compartment before you secure it by pushing against the bobbin itself. Doing this first will help prevent a lot of frustration later on.
5. Place the Thread through the Notches
Using your index finger and thumb, thread the thread through the notches on the compartment. It should be the first notch on the left side, with the thread passing through each succeeding notch in turn until the thread is properly threaded through the bobbin compartment.
6. Secure the Thread
Once the thread is properly through every notch and through the bobbin compartment, you should then take the ends of the thread and secure it by pulling tight and then fastening off with a few small stitches.
7. Put the Bobbin Back in the Machine
Once the bobbin thread is properly secured, you can then place it back in the machine and be sure to insert it in the correct direction. It should fit snugly into place without any difficulty.
8. Pull the Thread through the Slot
The final step is to pull the thread through the slot on the top of the machine. You will usually see a small hole on the side of the machine or the plate, so you should take the thread and pull it through there until it is about 2 inches out of the sewing machine.
Testing the Thread
After the bobbin has been properly inserted, you can test the bobbin thread by holding onto the end of the thread while pressing the pedal and seeing if the thread is being pulled through. If it is, then the bobbin has been correctly inserted — if not, you will need to check the bobbin again to ensure that it is correctly in place.
Making sure that the bobbin is correctly placed in the machine is essential for optimal performance and operation — if it is not correctly inserted, the tension in the machine will become too tight and the machine will not be able to stitch the fabric correctly. It is always worth taking the time to insert the bobbin correctly and double-checking that all of the threads have been properly threaded — not just the one from the bobbin — to ensure that there are no issues with the machine stitching.
Fixing Bobbin Issues
If you find yourself having difficulties with the bobbin thread, the most common issue is that the thread has become tangled or too tight in the bobbin. The fix for this is usually pretty simple — simply take the bobbin out, remove the thread, and re-thread it. Another potential issue could be that the bobbin isn’t inserted correctly into the machine. Make sure the bobbin is secure and facing the right direction and make sure that it snaps into place snugly.
In some cases, the machine might be too tight or the thread won’t pull through the bobbin. In this case, you should refer to the manual and make sure that the tension disk is properly in place and the thread is correctly threaded through the disk. If possible, adjust the tension disk so that it is the correct tension for the project you’re working on — too much tension will make the bobbin thread difficult to pull through, while too little tension can cause the fabric to pucker during stitching.
Troubleshooting
After reading through this tutorial, you should now have a better understanding of how to correctly insert the bobbin into a mini sewing machine. While the exact process can vary from machine to machine, the general process is typically the same. As long as you make sure the thread is correctly threaded through the machine and the tension is correct, the bobbin should be good to go!
Finally, if you find that you are having any issues with your sewing machine — especially with the bobbin thread — make sure that you consult the manual for your machine. This will ensure that you understand exactly how to properly thread your machine and insert the bobbin so that you don’t have any issues going forward.
Maintenance
It is important to keep the mini sewing machine clean and in good working order. Make sure that the machine is oiled regularly and that any lint is removed from the bobbin thread after each use. Doing this can help to keep your mini sewing machine in perfect condition and ensure that it is always able to stitch fabric correctly and accurately.
Pieces of broken needle or other fabric fragments can also cause potential jams and make stitching difficult. To avoid this, it’s important to regularly check the needle and the bobbin compartment for any damage or broken pieces of thread that could cause jams or other problems.
Mobility
Mini sewing machines are ideal for those who need to sew on the go. Whether you’re taking a sewing class, going to a friend’s house for a sewing project, or going to a sewing convention, you can be sure to bring your mini sewing machine with you and be ready to stitch!
Most mini sewing machines are light enough that you can carry them in a bag or backpack, making them ideal for travel. If you’re looking for a sewing machine that you can take anywhere, a mini machine could be the perfect choice.
Speed and Convenience
Mini sewing machines work just as well as full size models, but they can be faster and more convenient to use. With a mini sewing machine, you don’t have to waste time setting up a full size machine and can just get right to work. Additionally, their small size means they can easily be stored and put away when not in use.
These tiny machines are often much easier to use than their larger counterparts, so you can stitch quickly and easily. Plus, many mini machines are affordable, so you can get the same quality stitches for a fraction of the cost.
Durability
Mini sewing machines are incredibly durable and can last for years with proper care and maintenance. Most mini machines are already smaller and more compact than full size machines, so they require less power and have fewer moving parts, which makes them more reliable and easier to maintain.
Additionally, many mini sewing machines are made with durable materials such as metal and plastic, so they can withstand the wear and tear of regular usage. This makes them ideal for frequent sewers and those looking for a reliable machine that they can use for years.
Safety
Finally, mini sewing machines are designed to be safe and easy to use. Most machines come with automatic shut offs, so you don’t have to worry about the machine running while you’re not using it. Additionally, the smaller size of the machines makes them much easier to handle and reduces the risk of injury.
These tiny machines can be perfect for beginning sewers, as they are easy to manage and require minimal effort to use. Plus, their small size makes them a great choice for sewing classes and other activities with small groups.
