Steps to Put Foot Down on Sewing Machine
Sewing machines are a great tool for creating clothing, home décor and quilting projects. The foot on the machine can make the job even better by providing the right amount of pressure and guiding the fabric in the correct direction. Knowing how to put the foot down on the machine can make all the difference to a successful sewing project.
Before getting started, make sure the sewing machine is sitting in a stable position on a flat surface. If the machine is wobbly or uneven, it can cause problems with the tension and lead to unsteady stitching. Once the machine is in the correct spot, it’s time to get the foot on the sewing machine.
Lift the spool holder and locate the lever, then lower the needle to the lowest position. Put the power switch to the off setting and make sure the knob is in the proper position. Take the foot that is being used and locate the screw. Tighten the screw by turning it clockwise.
Remove the presser foot holder and the flat bed to expose the feed dogs. Place the foot so that it directly covers the feed dogs and that the needle comes through the slot in the middle of the foot.
Next, insert one flat with the washer into the screwdriver mechanism. Place the thread onto the spool holder, as well as the bobbin and thread it according to the machine’s instructions. Line up the thread with the slots on the take-up lever and slowly turn the hand wheel either in a clockwise or counterclockwise direction. Make sure the thread is correctly placed in the tension discs.
When the thread is properly threaded, hold the take-up lever with one hand and move the foot up until it is against the fabric. This will hold the thread taut and keep it running smoothly through the fabric. Put the power switch to the on position and move the needle up and down. Now, gently lower the foot and begin to sew. It is important to keep your hands away from the needle while the machine is running in order to avoid any unnecessary injuries.
Finally, when the sewing is complete, it is essential to switch the power off and ensure that the foot is securely attached to the machine by checking the screws and the thread. This will ensure a successful sewing project and prolong the life of the sewing machine.
Using a Zigzag Foot
Using a zigzag foot is a great way to add texture and pattern to various sewing projects. The foot allows the user to sew stitches of different lengths, from very tiny to very wide. The zigzag stitch is also great for finishing raw edges, as it gives them a neat and decorative finish.
To place the zigzag foot in the machine, begin by finding a lever that looks like a flat plate by the needle. The plate has a small hole in it. Raise the lever and the needle at the same time to the highest position, then take the foot and insert it into the hole. Make sure the foot covers the needle plate and the needle stretches up through the middle of the foot.
Once the foot is in place, thread the machine as usual, taking extra care to make sure the thread is properly tensioned. Lower the needle plate and the lever so that the foot is against the fabric. Move the hand wheel one step at a time in order to ensure the thread does not tangle.
The zigzag foot will provide the necessary pressure for sewing the stitches. Lift the foot very slightly and turn the wheel to the left and then to the right to move the needle from side to side, creating the zigzag effect. Make sure to keep the hands away from the needle while the machine is running.
Once the stitching is complete, switch off the power and ensure that the foot is securely attached to the machine. Also, do not forget to make sure the needle is at its lowest position before taking the foot off. With the right techniques and this simple guide, the zigzag foot can add an incredible amount of detail to any sewing project.
Buttonhole Feet
A buttonhole foot is a great tool to use for working with buttons and buttonholes. Buttonhole feet makes it easy to make this type of hole as it provides a consistent and accurate stitch, making the sewing process much faster and easier.
First, make sure the machine is turned off and the needle is in the lowest position. Find the lever that is located near the needle and the screw driver mechanism. Lift this lever and slip the buttonhole foot over the needle. Make sure the foot is securely fitted, then close the lever.
Once the buttonhole foot is in place, it’s time to set up the machine. Choose the stitch length and width that is most appropriate for the button, then thread the machine as usual. Put the power switch to the on position and slowly move the needle up and down. Put the foot down on the fabric and slowly begin to sew.
When the stitching is complete, it is important to switch off the power and remove the foot. Check the stitches to make sure the buttonhole looks neat and even. If the buttonhole is not satisfactory, it is a good idea to go back and make any necessary adjustments.
Sewing with a Quilting Foot
A quilting foot is an important tool for any serious quilter. The foot makes it easy to stitch evenly spaced lines, making it ideal for creating quilts and other projects that require precise and accurate stitching.
To attach the quilting foot to the machine, make sure the power is off and the needle is in the lowest position. Locate the lever that looks like a flat plate and slip the quilting foot over the needle plate. Check the foot is firmly in place, then raise the needle plate and the lever back up. This will secure the foot to the machine.
Threading the machine is the same as with other feet, but it is important to make sure the fabric is securely held in place. The quilting foot works best on a flat bed and using basting pins can help keep the fabric from slipping. To begin sewing, slowly turn the hand wheel to ensure the thread is properly tensioned.
Once the machine is set up, place the foot on the fabric and begin to sew, being careful to keep the hands away from the needle. The quilting foot provides the necessary pressure for stitching that is even and accurate, so it is important to make sure the foot is parallel to the fabric.
Finally, when the sewing is finished, switch off the power and ensure that the foot is securely attached to the machine. Carefully unthread the machine according to the directions provided and enjoy the finished project!
Blind Hem Foot
The blind hem foot is used to sew a neat, flat and invisible hem on fabrics such as silk, linen and rayon. This type of foot is specially designed to make the stitching virtually invisible. It is an essential tool for creating professional-looking garments.
Begin by making sure the needle is in the lowest position and the machine is switched off. Place the blind hem foot on the needle plate and secure it by raising the lever and needle to the highest position. Check the foot is securely fitted and close the lever.
Once the foot is in place, thread the machine as usual, taking extra care to check the tension. Put the power switch to the on position and slowly move the needle up and down. Place the foot on the fabric and slowly begin to sew. Make sure the foot is parallel to the edge of the fabric to ensure accurate stitching.
When the stitching is complete, it is important to switch off the power and release the foot from the machine. Check the hem to make sure it is neat and even. If there are any imperfections, go back and make any adjustments necessary.
Conclusion
It is important to understand how to put the foot down on the sewing machine in order to achieve the best results. Having the right foot for the job is essential, as each foot has its own function and provides different benefits. With the right techniques and a good understanding of the machine, any project can be a success!
