Introduction
If you have recently started sewing and don’t know how to put needle in sewing machine SINGER, you are in the right place. This article will teach you how to do it step-by-step. Sewing can be tricky and a little intimidating, so follow these instructions and you’ll be ready to sew in no time!
Types of Needles
Before you start inserting the needle, it’s important to understand the different types of needles, as each type is designed for a specific purpose. The most common type of needle is the universal needle, which is suitable for many types of fabrics. Ball point needles, which have a rounded tip, are best used with knits. Lastly, there are special, heavy-duty needles for extra thick fabrics, or those that are extra hard to sew.
Instruction for Inserting the Needle
Now that you know about the different types of needles, it’s time to insert it into the sewing machine. First, make sure the power is turned off, as you don’t want to accidentally start the machine while inserting the needle.
Next, use your screwdriver to loosen the screw located on the front of the machine. This will allow you to lift the needle plate, which is the flat part of the machine.
To finish, insert the needle into the left side of the needle plate, making sure the flat part of the needle is facing the inside of the machine. Then, use the screwdriver to tighten the screw, and your needle is safe and secure!
Changing the Needle
Sometimes, you might need to change the needle. Perhaps you switched to a different type of fabric, or you need a sharper needle for more precision. Changing the needle is just as easy as inserting it.
First, turn the power off and loosen the screw on the front of the machine. Then, remove the needle by pulling it out. Be sure to hold onto the needle with your hand!
Now you can insert your new needle. Remember to check the size and type of needle in relation to the fabric you are working with. Place the needle in the same spot as the old needle and tighten the screw.
Troubleshooting
If you find that the needle won’t stay in place, it might be because you failed to tighten the screw properly. If this is the case, just remove the needle and start over. It could also be because the needle is too large or too small for the machine. Make sure you double-check the size and type of needle before inserting it.
Tips and Tricks
When inserting a needle, make sure you do it gently so that you don’t damage the needle plate or the needle itself. Also, consider investing in a good-quality needle. A sharp needle produces cleaner stitches and makes sewing a lot easier.
When selecting a needle, pay attention to the size and type. If it’s too small, you might end up breaking the needle, and if it’s too large, it won’t fit.
Threading the Needle
Finally, it’s time to thread the needle. First, find the right size of thread for the project you are working on. Make sure to select a thread that is strong enough to handle the job.
Now, slide the upper thread through the needle’s eye. To make it easier, you can use a threader or a small pointed object. Pull the thread until there is a small loop at the end, then lower the presser foot, and you’re all set!
Fixing Thread Tension
The thread tension on a sewing machine is important. If the tension is too tight, the stitches will be too tight, and if it’s too loose, the stitches won’t hold. Fortunately, most modern sewing machines have an adjustable thread tension and it’s easy to fix.
To adjust the thread tension, use the knob on the side of the machine. If you turn it clockwise, the tension will be tighter and if you turn it counter-clockwise, it will be looser. If you keep adjusting it until the stitches look good, you’re all set!
Checking the Stitch Length
Another important thing to do when sewing is to check the stitch length. This will determine how tight or loose the stitches will be.
To adjust the stitch length, turn the dial on the side of the machine. Most machines have a range of sizes, so you can adjust the length to the size you need. Then, do a few practice stitches to make sure the tension is right.
Using the Reverse Sewing
The reverse sewing is an important feature on any sewing machine as it helps to reinforce the stitches. All you have to do is press the reverse button, and the machine will start sewing in reverse. This will create stronger and more durable stitches, making it easier to finish the project.
When you are done sewing in reverse, press the forward button to finish the stitch. Keep in mind that you should use the reverse sewing at the beginning and the end of a seam.
General Maintenance
Last but not least, performing general maintenance on your sewing machine is key to keeping it running smoothly. Keep the machine clean and free of dust, as this can interfere with its performance. Make sure to oil the machine regularly and follow the manufacturer’s instructions for the rest.
It’s also important to store your machine in a cool, dry place and keep it away from strong sunlight. These simple tips will ensure that your machine will last for many years to come.
