Preparing the Table
Before you can insert your sewing machine into a table, you need to prepare the table for the machine. Make sure there is enough room inside the table to accommodate the machine and allow for easy access. Check the table’s stability by gently pressing against it. If the table wobbles, or if it doesn’t feel solid, you may need to reinforce it before you proceed. It’s also important to make sure the table is level. Measure each of the table’s legs with a level tool to make sure they are even with one another.
Measuring and Cutting the Hole
Once the table is stabilized and level, you need to measure and cut a hole that’s large enough to fit the machine. To do this, you’ll need to measure the sewing machine’s width, depth, and overall height. It’s important to measure the machine itself, rather than its packaging, as the measurements can change depending on what it’s stored in.using these measurements, draw a template on a piece of paper, making sure that the measurements are exact. Cut out the paper template and use it as a template for cutting the top of the table.
Gluing and Fastening theMachine
Once the hole is cut, you can glue and fasten the machine to the table. Start by applying a thick layer of adhesive glue to the bottom of the sewing machine, making sure to spread it evenly. Place the machine into the hole in the table and press down firmly, allowing the glue to adhere to the table and the machine. Secure the machine to the table with small screws, making sure they are tight to ensure the machine is held securely. You may need to replace the screws or tighten the screws after the first few uses.
Securing the Machine’s Power Supply
Once the machine is firmly attached to the table, you need to secure its power supply. Depending on the sewing machine’s design, you may have multiple power cords or an ‘all-in-one’ cord. Start by measuring the length of the cord and then find an appropriate place to either route or secure it. Make sure the cord is away from any moving parts and is not in an area that could become snagged or pulled during use.
Hiding the Cords and Cables
For a neat, clutter-free look, it’s best to either route the power cord through the inside of the table or to hide it under the table using cable organizers. Cable organizers come in a variety of shapes and sizes and can help you keep the power cords hidden and tangle free.
Built-In Support and Upholstery
If the machine is going to remain in the table for a long period of time, you may want to consider adding built-in support and upholstery around it. Adding extra foam or other cushioning materials around the machine can help protect it from wear and tear and can also add extra comfort for the user.
Sizing and Cutting the Insert Plate
Once the machine is in place and the power cords are secured, you’ll need to measure and cut an insert plate. An insert plate is a piece of wood or metal that sits in the center of the table. It’s used to evenly distribute the machine’s weight and helps protect the table from damage. To measure the plate, first measure the hole in the table, making sure to account for any seams or edges. Once you have the measurements, cut the plate to size and place it inside the hole in the table.
Adding an Auxiliary Table or Support Frame
For extra stability and support, you may want to attach an auxiliary table or a support frame to the main table. An auxiliary table sits in the center of the main table and provides added stability for the main table. A support frame is an additional piece of wood or metal that attaches to the sides of the table to support the machine and the main table.
Conclusion
Once the table is prepared, the machine is firmly secured, and the power cords are hidden, you’re ready to use your machine in its new home! With the right tools and materials, putting a sewing machine in a table is a simple, straightforward process. While it may seem intimidating, taking the time to ensure the machine is safely and securely fastened will ensure years of worry-free sewing.
