How To Set Up A Sewing Machine Kenmore


Setting up a Kenmore sewing machine may seem intimidating, but with a few simple steps, you can quickly become comfortable with the task. This article will provide an overview of the basic components of the machine, discuss how to thread it, and explain how to set the inclination and other settings correctly. Additionally, four separate sections will further expand on topics related to setting up and using the Kenmore sewing machine.

Basic Components

To get started, it is important to have a basic understanding of the machine’s components. The main body of the Kenmore sewing machine typically houses the power-driven wheel that moves the needle up and down. This wheel is usually a handle wheel, meaning that it is manually turned by a different crank. Kenmore sewing machines also typically have a few different levers and knobs that can be used to adjust the inclination of the needle, the height of the pressure foot, and the tension of the thread.

Threading the Machine

Begin by threading the needle with the proper thread. Pull the thread through the eye of the needle from the back of the needle to the front. Then, gently guide the thread along the path on the machine and use the tension wheel to pull the thread into the tension disks. Finally, pull the thread through the take up lever. After the thread has been correctly threaded, turn the wheel handle towards you to lower the needle.

Inclination Settings

The inclination settings on a Kenmore sewing machine determine how easily the needle will move up and down when the wheel handle is turned. Begin by setting the wheel handle to its lowest setting. Then, adjust the inclination dial until the strip of fabric is stretched just enough to thread the apposite needle. If the inclination is set too high, the needle will break, and if it is too low, the stitches will not form correctly.

Additional Adjustments

On the Kenmore sewing machine, there are several adjustable settings that may prove useful. To raise and lower the pressure foot, adjust the thumb screw. To adjust the thread tension, turn the tension wheel. Depending on the thickness of the fabric and the type of stitch, the tension should be adjusted accordingly. Finally, to prevent the thread from fraying, here is a recommendation to purchase a cotton thread as opposed to a polyester thread.


When the machine is set up correctly, the process of sewing with a Kenmore sewing machine is fairly simple. Begin by setting the wheel handle to the lowest setting and turning the wheel until the needle is in the desired position. Then, use a foot pedal to turn the wheel handle and begin sewing. When all of the necessary stitches have been sewn, turn the wheel handle to the highest setting and press the foot pedal once more.

Threading a Bobbin

Given the amount of precision required, threading a bobbin can be tricky. Start by placing the bobbin onto the pin, securing the thread end between the two flanges. Then, pull the thread behind the tension spring, and ensure the thread is lying snugly against the bobbin. Gently guide the thread onto the hole on top of the bobbin, and press the foot pedal while pulling the thread down. If done correctly, the thread should surface through the upper menu of the Kenmore sewing machine.

Safety Precautions

When using a Kenmore sewing machine, it is important to practice caution at all times. First, check the machine for worn or loose parts and regularly lubricate the machine’s components. Additionally, it is important to keep all machine parts and fabrics away from any open flames as they can easily catch fire. Finally, it is also important to read and understand the sewing machine’s manual, as there may be additional safety guidelines that must be followed.

Maintaining the Machine

In order to ensure that the Kenmore sewing machine remains in proper working condition, it is important to regularly clean the area and keep the machine away from moisture. Ensure that the machine is properly covered with a cover when not in use and regularly check for rust, as rust could mean that water has seeped inside the machine. Additionally, when the machine is in use, make sure it is placed on a level, stable surface and that the motor is not overtaxed.

Variations in Design

Kenmore sewing machines come in a variety of models and sizes, so it is important to know your specific machine’s components. Some models may feature more settings and levers, while others may have fewer. When using a different model of Kenmore sewing machine, make sure to read the owner’s manual to become familiar with the machine’s components and settings.


Setting up a Kenmore sewing machine can seem daunting at first, but with a little bit of information, patience, and practice, anyone can become an expert. This article has provided an overview of the basic components of a Kenmore sewing machine, discussed how to thread it, and explained how to set the inclination and other settings correctly. Additionally, four separate sections have further expanded on topics related to setting up and using the Kenmore sewing machine.

Geoffrey Kirby is an experienced author and sewist who has been creating sewn projects for over 20 years. He has a passion for teaching beginners and inspiring more advanced sewists both online and through his writings. Outside of writing about sewing, Geoffrey loves to explore new techniques and styles of sewing that incorporate upcycling fabric remnants into sweet items with personality.

Leave a Comment