In sewing, a factory fold is a term used to describe how the fabric is laid out when it is delivered to the store. The fold line is usually straight, but may be curved, and is usually at a 90-degree angle to the selvage. The two edges of the fold line are usually cut at a 45-degree angle.
Factory fold is the term used to describe the way in which a sewing pattern is originally folded and packaged. The factory fold is generally a precise, clean fold that is meant to keep the pattern pieces in place and prevent them from shifting during transport or storage.
Why do pattern pieces have a fold line?
When cutting out a pattern, the “on the fold” line indicates where you should position the edge of the pattern piece on a fold in the fabric. This allows you to cut a piece of fabric that is twice as large as the pattern piece.
If your pattern says to “Cut 2”, you’ll want to fold your fabric half with your selvages together. This means that the folded edge is on the left side and the selvages (or raw edges) are on the right side.
What sewing patterns are worth the most money
Vogue Patterns have been around for many years and are known for their quality and attention to detail. They have a long history of partnering with up and coming fashion designers, which has helped them become one of the most expensive pattern companies today. While their prices may be high, their patterns are definitely worth the investment if you want to create a high-quality garment.
When you are cutting a garment out of fabric, it is important to cut a piece of paper the same size as the dimensions of the fabric. This will help you to see how the garment will look when it is finished. Try various fabric folds—lengthwise, crosswise, partial, and double—and ways of placing the pattern pieces on the fabric.
What are the three types of folds?
Folds are deformations of rocks in which the rock strata are bent or curved. The three main types of folds are anticlines, synclines, and monoclines.
Anticlines are arches or U-shaped structures where the rock strata are bent upwards. Synclines are troughs or V-shaped structures where the rock strata are bent downwards. Monoclines are single, steeply-angled bends in the rock strata.
Fold lines are used to mark the locations where you will need to fold the fabric. These lines are typically longer than stitch lines. Stitch lines are used to mark the locations where you will need to stitch the fabric. These lines are typically shorter than fold lines.
What does it mean to cut 1 on fold?
“Cut one on fold” means that you will need to cut one piece of fabric according to a half pattern piece. You do not cut along the fold. The pattern piece should align with the fold of the fabric. When cut and unfolded, you will get a piece of fabric that is double the size of the pattern template.
Cutting on the fold simply means that you fold your fabric in half lengthwise with the selvage edges (non- fray edges) touching and then lay your pattern piece on top of the fabric so that the fold line on the pattern piece is aligned with the folded edge of the fabric. You will then cut along the outermost edges of the pattern piece, giving you two symmetrical pieces.
When you fold the fabric to be a double thickness as per the pattern
When you fold fabric to be a double thickness, you are essentially folding the fabric in half width ways. This means that the selvage on one side meets up with the selvage on the other side of the width of fabric. This is commonly done when following a pattern, as it gives the fabric more stability and structure.
The three most difficult materiels to sew with are leather, sheers, and knits. Here are some tips to make it work:
-For leather, use a heavy needle and a sharp rotary cutter. Cut small pieces at a time and use a lot of pins.
-For sheers, use a serger or combine with another fabric for stability. Use plenty of pins and be very careful when handling the fabric.
-For knits, use a stretch stitch or a serger. Be careful not to stretch the fabric out of shape and use lots of pins.
Which brand of sewing patterns are best?
There are a few different types of sewing patterns available for those interested in pursuing a zero waste lifestyle. Birgitta Helmersson zero waste sewing patterns are one option. Jalie Patterns also has a few different zero waste sewing patterns available. Madalynne, Megan Nielsen, and Named all have a few different options for zero waste sewing patterns as well. Sew Love Patterns has a large variety of zero waste sewing patterns available. Sewing Patterns by Masin also has a few different zero waste sewing patterns.
This is a great question! Although, technically, unless the designer has gone through the extensive process of specifically Copyrighting the finished product, you can sell finished products made by any pattern out there as long as you make it known that you did not design it.
What are the 7 types of folds
Pipe folds, zigzag folds, spiral folds, half-lock folds, diaper folds, drop folds, and inert folds are all types of folds that can be used to create different shapes and patterns with paper. Each type of fold has its own unique properties that can be exploited to create different effects.
Folds and wrinkles in fabric can be broken down into six different types: pipe, zigzag, spiral, half-lock, diaper, and drop. Each type has a different name and characteristics, which can be helpful to know when you’re drawing them.
Pipe folds are the simplest type of fold, and are often found in tube-shaped garments like socks and turtlenecks. To draw a pipe fold, simply draw a straight line with a few small curves at the edges.
Zigzag folds are more complex, and are created when fabric is folded in multiple layers. To draw a zigzag fold, start with a series of curves that intersect each other.
Spiral folds are similar to zigzag folds, but instead of intersecting, the curves wind around each other. To draw a spiral fold, start with a series of small, tightly wound curves.
Half-lock folds are created when fabric is gathered in one place and then allowed to fall freely. To draw a half-lock fold, start with a small curve and then add a series of loose, flowing curves.
Diaper folds are created when fabric is gathered at the top and bottom, but not in the middle
What are the 4 types of folds?
A symmetrical fold is one in which the axial plane is vertical. This means that the two sides of the fold are mirror images of each other. An asymmetrical fold is one in which the axial plane is inclined. This means that the two sides of the fold are not mirror images of each other. An overturned fold, or overfold, has the axial plane inclined to such an extent that the strata on one limb are overturned. This means that the strata on one side of the fold are upside down relative to the strata on the other side of the fold. A recumbent fold has an essentially horizontal axial plane. This means that the strata on both sides of the fold are horizontal, or nearly so.
Classification of folds:
Folds are classified into two main types, namely anticlines or up-folds and synclines or down-folds.
Anticline folds are upward-arching folds, in which the oldest rocks are in the center of the fold, with the youngest rocks on the outside. Syncline folds are downward-arching folds, in which the oldest rocks are on the outside of the fold, with the youngest rocks in the center.
There are several types of anticline and syncline folds, including:
Symmetrical fold: A fold in which the limbs of the fold are of equal size and shape.
Asymmetrical fold: A fold in which the limbs of the fold are of unequal size and shape.
Monocline: A fold in which one limb is significantly inclined with respect to the other.
Plunging fold or pitching fold: A fold in which the limbs of the fold intersect at an angle, so that the fold looks like it is “plunging” or “pitching” into the earth.
Isocline or carinate fold: A fold in which the limbs of the fold are of equal size and shape, but are
What are the two main types of folds
Each type of fold has a different shape. Anticlines are arches, synclines are troughs, and monoclines are ramps.
Folds occur when rocks are bent or deformed by stress. The type of fold depends on the direction of the stress. If the stress is compression, the rocks will be pushed together and the fold will be an anticline. If the stress is tension, the rocks will be pulled apart and the fold will be a syncline. If the stress is shearing, the rocks will be pushed together at an angle and the fold will be a monocline.
Folding is the deformation of a layer of rock that results in the creation of bends and curves. The two most common types of folds— anticlines, or upward-arching folds, and synclines, down-ward, trough-like folds— occur when compressional forces act on rock layers. Another type of fold is a monocline In a monocline, rock layers are folded so that both ends of the fold are horizontal.
Conclusion
Factory folds are usually found on patterns that have been purchased from a store. These patterns have already been cut and the folds are already in place. When you open up the pattern, you will see that the pieces are all arranged on the fabric with the fold lines already in place.
There are a few different ways you can interpret this term, but generally speaking, factory fold means that the fabric has been preshrunk and ironed before being sent to the customer. This is important to know because it means the customer doesn’t have to do any extra work in preparation for using the fabric.
