Maintaing your Husqvarna Sewing Machine
A Husqvarna Sewing machine is a powerful tool that can make sewing and mending simple, but if not properly cared for, it can suffer from poor performance. Regular cleaning and maintenance of your machine will help not just to keep it in tip-top shape, but also to extend its life span. To get the most out of your Husqvarna sewing machine, follow these steps.
Getting Started
Before you begin cleaning your Husqvarna sewing machine, it’s important to prepare the machine. Unplug the machine from the power source and cover the work area to protect it from any dust or dirt. Loosen the needle plate so you can remove the bobbin case and bobbin. Open the bobbin case and inspect it for any lint or dirt that has built up on it. If there is any, use a soft brush to clean it off. Make sure to empty the bobbin case of any thread, lint or debris as well.
Removing the Bed Plate
The next step is to remove the bed plate. This allows you to access the entire mechanism, which consists of several key components, including the needle bar and drive shaft. You’ll need to hold up the needle bar while lifting up the bed plate and locating the retaining screws. Detach the bed plate, then clean any dirt and grime from its exterior and interior surfaces. Clean around the needle bar, as well as any other parts you find. Once complete, replace the bed plate on the machine and tighten the screws.
Cleaning the Drive Belt
The drive belt is a key component of your Husqvarna sewing machine and should be cleaned periodically. To do this, you’ll need to put your machine in reverse and turn the hand wheel. This will rotate the drive belt and expose its surface to view.use a soft damp cloth to remove any dirt and debris that has built up on it, then wipe the surface dry.
Lubricating the Machine
Before reassembling your Husqvarna sewing machine, it’s important to lubricate its components. You’ll need sewing machine oil that is specifically designed for this type of machine. Apply several drops of oil to each part you have cleaned, including the needle bar, feed dog, drive shaft and tension disk. Ensure the moving parts are well lubricated and free of any strands of thread.
Assembly
Assemble your Husqvarna sewing machine in the reverse order of how you disassembled it. Insert any bobbins, oil the needle bar and feed dog, and reattach the bed plate. Before reconnecting the power source, move the hand wheel until the needle is at the uppermost position. Check all the screws and make sure they are secured. Reattach the power cord, turn on the machine, and check the operation to make sure it’s working properly.
Overview
By following the steps outlined in this article, you can keep your Husqvarna sewing machine functioning at its peak performance. Proper cleaning and lubrication will ensure your machine runs smoothly and help extend its life span. Cleaning your Husqvarna sewing machine is a relatively simple process that will help you make sure your machine is always in perfect condition.
Advancement with Filters and Strainers
Installing filters and strainers when cleaning your Husqvarna sewing machine is a great way to make sure all the dirt and lint that comes off the machine is collected. This helps to prevent it from getting into the machine and further contaminating it. Filters and strainers can be found online or at your local furniture store. Make sure the filters or strainers are the right size for your machine and that they fit properly.
Nozzles and Hoses
To get a thorough cleaning, use a nozzle and hose attachment on your Husqvarna sewing machine. This is an effective way to blast away any dirt stuck in the nooks and crannies of the machine. The nozzles should be wide and fitted with soft bristles that are gentle enough for the machine’s parts. Make sure to keep the nozzle angled away from the machine and at a distance of at least three inches from the surfaces you’re cleaning, as too much pressure could damage the delicate parts of the machine.
Cleaning Solutions
The most important thing to remember when cleaning your Husqvarna sewing machine is to use the appropriate cleaning solutions. Generic all-purpose cleaners can damage the machine and its components, so it’s important to use a specifically-designed cleaner for your Husqvarna sewing machine. These cleaners are formulated to remove dirt and lint without leaving a residue or causing any damage to the delicate parts of the machine.
Preventative Maintenance Habits
Another great way to keep your Husqvarna sewing machine running like new is to develop preventative maintenance habits. This means ensuring you clean and lubricate the machine on a regular basis. You should also make sure all the bobbins are wound properly and the thread is always properly threaded through the machine. This will go a long way in helping to keep your machine working optimally.
Safety Tips
It’s also important to take safety precautions when cleaning your Husqvarna sewing machine. Always make sure the machine is unplugged and the power source is turned off before performing any maintenance. Wear gloves, goggles, and a face mask to protect yourself from any particles that may be airborne. Don’t use harsh chemicals or solvents when cleaning the machine, as these can cause damage to the mechanism. Finally, dispose of any used cleaning materials in the appropriate manner.
