If you are a beginner in sewing, getting bobbin in the sewing machine is usually daunting. You may be worried that you may damage the bobbin or the thread. This article will guide you through the process of getting a bobbin correctly inserted in the machine so that you can get the best out of your fabric.
Choose the Right Bobbin for Your Sewing Machine
The first step to getting bobbin in the sewing machine is to select the right bobbin for your machine. Different sewing machines have differently sized bobbins so you have to get the one which fits snugly into your machine. Even if the bobbin looks similar to the bobbin of your machine, it may still not be the right one for your machine. Therefore, always check the type, size, and shape of the bobbin before purchasing it.
Wind Up the Bobbin
Before you start winding the thread on the bobbin, make sure that you pick a thread that works well with your sewing machine. For this, ask the thread manufacturer or read the sewing machine manual. Also, make sure to set the tension of the bobbin winding thread so that the thread does not get twisted or tangled when winding around the bobbin. Many professionals suggest that it is best to wind the bobbin by hand. This gives you a bit more control and prevents any problems from occurring.
Thread the Bobbin
Once your bobbin is ready, it is time to thread the machine. Start by threading the needle and the bobbin. This can be done by using the bobbin winder that is located at the side of the machine. Thread the bobbin in the same way that you thread the needle and then thread the needle with the thread. Once that is done, the bobbin should be secure.
Secure the Bobbin in Place
Next, you need to secure the bobbin in place. Most modern machines have a bobbin holder that you have to secure before the bobbin is inserted. The bobbin holder will reduce the chance of the bobbin slipping out of the machine. Once the bobbin holder is in place, the bobbin will be ready for insertion.
Insert the Bobbin into the Sewing Machine
Now it is time to insert the bobbin into the sewing machine. This can be done either manually or by using an automated system. For manual insertion, you have to do the following steps: First, you need to put the bobbin on the spool pin. Ring the thread a couple of times around the spool pin. Then, raise the needle, pull out the bobbin thread, and then make sure that the thread is secure beneath the tension disc. Finally, lower the needle, and check that the thread is securely under the tension disc. Now, you can start to do your sewing work.
Check that the Bobbin is in the Correct Place
After the bobbin has been inserted into the sewing machine, it is important to check if the bobbin is in the correct place. To do this, you can use a seam ripper to lift the plate of the machine and then check for any spaces around the bobbin holder. There should be an even thread around the bobbin holder from the through-hole to the spool pin. If there is a gap, that indicates that the bobbin is not in the correct position. In this case, the bobbin should be removed and inserted again.
Troubleshooting Common Bobbin Problems
There might be instances where the bobbin does not fit into the machine, or the thread does not seem to be winding up properly. In these cases, it is important to check for any debris inside the machine and make sure that the bobbin is compatible with the machine. If the bobbin is not compatible with the machine, you may have to purchase a new bobbin.
Conclusion
Getting the bobbin into the sewing machine is a very important part of sewing and can take some time to master. Although it may seem daunting at first, with the right information and guidance, it is not difficult to get the bobbin into the machine correctly and start to enjoy the art of sewing.
