How To Install The Bobbin On A Singer Sewing Machine

Overview of the Singer Sewing Machine Bobbin

Sewing machines are one of the most widely used and necessary tools for people of all ages, especially when it comes to making clothing or accessory items for yourself or someone else. Sewing machines can be expensive and intimidating, but once you get the hang of them, you can make amazing creations. One of the essential parts of using a sewing machine is attaching the bobbin, which is a small spool of thread. It needs to be situated properly in the machine in order for the stitching to work properly. Here’s a comprehensive guide on how to reliably install a bobbin in a Singer sewing machine.

Selecting the Right Bobbin

Before installing the bobbin, you must be sure to select the right type for your Singer sewing machine. There are a few points to take into consideration such as the size of the bobbin, the shape of the bobbin, and the type of thread used. To choose the correct bobbin, it is always a good rule of thumb to check the manual that came with the machine; the manual should specify the type and size of bobbin your specific Singer sewing machine requires. It is important to remember that Singer bobbin cases can often vary depending on the model of the sewing machine.

Preparing the Bobbin Before Installing

Once you have the right bobbin, you need to prepare it before you install it into the machine. To do this, you will need to have the right type of thread selected and ready to go. Start by threading the bobbin by filling it with a spool of the specific thread that is recommended in the manual. To do this, you will need to cut a length of thread from the spool and thread it through a bobbin guide. As this type of thread can be delicate, it is important to use care when threading it. After the correct amount of thread has been wound, make sure to leave about an inch of slack, and then tie off the thread by tying it in a knot.

Installing the Bobbin

Now that the bobbin is prepared and filled with the right thread, it is time to install it into the machine. Open the bobbin compartment located at the top of the machine, by following the instructions in the sewing machine manual. After that, place the bobbin onto the bobbin case and secure it into place by pulling the thread through the slot on the side of the bobbin case. Once it’s in, pull the thread taut until it’s secured. Once the bobbin is in place, you can close the bobbin compartment door.

Testing the Bobbin

Once the bobbin is installed in the machine, it’s important to test it to make sure the thread is running properly. To do this, turn the hand wheel towards yourself, until the needle is in the highest position. Once it’s in place, pull the thread from the needle towards the bobbin. Once the thread is pulled taut, pull the lever downwards and you should see the needle reach all the way down and the bobbin rotating. This is a good sign and means your machine is ready to start sewing.

Maintaining the Bobbin

In order for your sewing machine to work correctly, it is important to keep the bobbin well-maintained. Doing so will ensure that it works smoothly and will help prevent any issues that could affect the accuracy of your sewing. Some simple things you can do to keep your bobbin in top shape include regularly checking and replacing the bobbin case and gently wiping down the bobbin case with a soft cloth.

Overcoming Common Bobbin Issues

While following the steps above should result in a successful installation, there are some common issues that can arise. One common issue is a jam in the bobbin. This usually occurs due to having too much thread in the bobbin or too little thread. In this case, you may need to take out the bobbin and install it again while checking that the amount of thread is appropriate. Other issues could be due to a loose gap in the needle or a faulty bobbin case. It is important to identify the issue before making any changes to the machine.


In conclusion, installing a bobbin in a Singer sewing machine isn’t difficult if you follow the right steps. Start by selecting the right bobbin and preparing it with the right kind of thread. Then, install it in the machine and test it before you start sewing. Finally, maintain it regularly and take good care of it in order to keep your machine running smoothly. Following these steps should help keep you sewing for years to come.

Geoffrey Kirby is an experienced author and sewist who has been creating sewn projects for over 20 years. He has a passion for teaching beginners and inspiring more advanced sewists both online and through his writings. Outside of writing about sewing, Geoffrey loves to explore new techniques and styles of sewing that incorporate upcycling fabric remnants into sweet items with personality.

Leave a Comment