How To Remove Janome Sewing Machine Cover

Safety Tips

When it comes to removing the Janome sewing machine cover, it is important to take all necessary safety precautions. This includes ensuring the machine is unplugged and the power is off before touching any part of it. Additionally, it is best to wear protective gloves and a face mask when dealing with the cover, because there are some sharp edges that could cause injury. If the cover is made of plastic, it is important to dispose of it responsibly, and not throw it away with regular household trash, as this could lead to more pollution in the environment.

The cover can come off easily with a few tools and proper care. The first tool to use is a small Phillips head screwdriver. The screws on the cover need to be removed and placed in a safe place in order to get the cover off. The second tool is a flat head screwdriver. This is needed for any other screws located around the edge of the cover. Additionally, if the cover is made of metal, then taking off the cover may require a drill.

Examine the bottom of the machine for any obstructions that are preventing the cover from coming off. If there are screws or other hardware in the way, take them off before attempting to remove the cover. Be sure to disconnect any wire harnesses or electrical wiring from the machine.

Once all of the screws are removed and any obstructions are cleared away, gently pull the cover off the machine. Depending on the model and make of the cover, there may be a few clamps that also need to be removed. During the removal process, be careful to not damage any of the machine’s wiring, as this could create a need for repair later on.

If the cover is made of metal, perform a quick inspection of the seams and edges to make sure they are securely fastened. If they are not, then the cover needs to be replaced. After the cover has been taken off the machine, wipe down any excess dust or debris that has accumulated on its surface. The Janome sewing machine cover can be put back on the machine in the same manner in which it was taken off.

Reinstalling the Cover

When it comes to reinstalling the Janome sewing machine cover, make sure the seams and edges line up properly. It is important to test the fit of the cover to make sure it has been properly installed. To do this, turn the machine on and check for any gaps in the cover that could allow dust or debris inside the machine. If there are any gaps, tighten the screws or clamps until the gap is closed.

Next, inspect any wires or electrical wiring that is attached to the machine to make sure they are securely connected. It is best to use the same screwdriver to put the screws back into place, as it will provide the most secure fit. Lastly, look for any exposed hardware around the edge of the machine, and make sure it is covered and secured properly with the cover.

If the screws are difficult to turn or the cover does not seem to fit properly, it is best to consult the machine’s manual to make sure all of the parts are correctly in place. Additionally, if the cover is made of plastic, it is suggested to use a sealant around the seams and edges to better insulate the machine.

This is especially important if the machine is used in a high-humidity environment, because plastic covers are more prone to warping and cracking. If the cover is made of metal, then it is best to use a grease or lubricant around the screws and clamps, in order to prevent any damage to the machine’s components.

Identifying the Correct Cover

When it comes time to buy a new Janome sewing machine cover, it is important to identify the correct model and make of the machine. This can be done by referring to the machine’s serial number or checking the inside of the machine for a model number. Additionally, the machine’s manual or online PDF can help identify the correct model.

Once the correct model is identified, it is important to choose the right material for the cover. Metal covers are generally more durable and can withstand wear and tear better than plastic covers. However, plastic covers are more affordable and come in a wider variety of colors and designs. It is also important to choose the right size, as some covers are designed specifically to fit a certain model and make of machine.

When buying the cover, it is best to buy any necessary tools, such as Phillips and flat head screwdrivers. Additionally, it is a good idea to buy a few spare screws and clamps, as they can be easily misplaced during the removal and installation process.

Making sure to pick the right cover can save time and effort in the long run. The correct cover can help ensure that the Janome sewing machine is protected from dust and debris, and can make sewing projects easier and more enjoyable for many years to come.

Maintenance and Cleaning

In order to keep the Janome sewing machine in good condition, it is important to regularly maintain and clean the interior and exterior of the machine. It is best to clean the machine every few months, or after long periods of inactivity. This can be done with compressed air, as this can remove any dust or debris that may have built up in the machine.

To keep the cover looking new, it is important to regularly polish the surface with a soft cloth. In the event that the cover is visibly damaged or cracked, it should be replaced right away. Additionally, the screws and clamps around the cover should be checked frequently, as they can become loose over time, which can result in the cover coming off more easily.

Having an extra cover on hand is also a good idea, so that it can be used in between cleanings and polishings. Keeping the cover clean and properly secured can help the machine retain its value, and ensure that the the machine can provide years of reliable service.

Sourcing and Cost

Janome sewing machine covers can be purchased from the local hardware store or directly from the Janome website. Additionally, online marketplaces such as eBay, Amazon, and Etsy can be great sources for covers as well, as they offer a wide variety of options to choose from. When purchasing the cover, it is important to note that plastic covers are usually more affordable, while metal covers are usually more durable.

The cost of the cover can range from $10-$50 depending on the material, size and make of the cover. Additionally, it is important to consider the cost of any tools or spare parts needed during the installation process. After the cover is purchased, all that is left is installation and maintenance. With the proper care, the Janome sewing machine can provide reliable service for many years to come.


For those looking for instructions on how to properly remove and reinstall the Janome sewing machine cover, the steps laid out above can help. As always, it is important to take the necessary safety precautions when dealing with the machine, and to also purchase any necessary tools and spare parts in advance. Additionally, it is important to identify the correct cover, and to also regularly maintain and clean the machine in order to keep it in good condition.

Geoffrey Kirby is an experienced author and sewist who has been creating sewn projects for over 20 years. He has a passion for teaching beginners and inspiring more advanced sewists both online and through his writings. Outside of writing about sewing, Geoffrey loves to explore new techniques and styles of sewing that incorporate upcycling fabric remnants into sweet items with personality.

Leave a Comment